TDXE4602S Touch Screen Scene control Switch,touch screen scene control switch

paper box

Specifications

Features: 

l           Replace conventional switches , replacing mechanical buttons with touch screen , longer life.

l           LED backlight touch buttons for switch control,address code of lights is clear to see.

l           Assorted many colors available so that to personalized the product.Gorgeously appearance is right down your decoration.

l           The words displayed on the panel could be change according to customer’s require.

l           Bidirectional communication by power line in high speed with the feedback function

l           Can be installed in any 86 -style junction box , socket panel ; ultra-thin design .Dimensions : 86X86X39mm

l           Simple setup, six seconds to complete the study; Each scene could control 16pc light or appliance ON/OFF at the same,so that you could realize scene control.

Technical Specifications:

l           Rated voltage 220VAC ± 10%, 50Hz ;equipment load ≤ 1000W

l           static power ≤0.5W  ;ambient temperature: -10~50°C

Project Installation:

Connect and install it by the professional persons as the wiring diagram. Avoid injury to people and products.

1.Shut off power.

2.Connection lines according to label on the switch.

Switch's "L" connects with Live wire.

Switch's "N" connects with Neutral wire.

Address settings:

There are four button on the touch panle , divided into two row ,to control 2pc scene,every scene could control 16pc light or appliance. Each row of text from left to right are: “ON”,the scene’s name (for example “Scene 1  Relax”) ,“OFF”.

1. Firstly give the scene switch itself a address.,such as give “C 01” to Scene1

Press the " ON " button of one scene 1 continuously with 5 scond. The state of panel text as: the LED indicator of “ON ” is displayed as blue , and then flashes once , the switch enter the learning state .At the same time press the controller ( such as : TDXE6671 remote ) ,so that send the “C01” to the switch,when the switch accept the address,the LED indicator of the switch will shine three times quickly, which means that the module has accepted the address . From now on, the user can control this scene module ON/OFF by remote.

Note:How to know which button of TDXE6671 means “C 01”,just press the third room nameof the remote,then press the first appliance,then it means C 01.

2.Then give the address which you need Scene 1 to control to the switch. Send the address commands orderly (For example A1 ON, B1 OFF….Max 16 addresses). the LED indicator of the switch will shine one time once the setting address is successful. If you have setup 16pc addresses, the LED indicator of the switch will exit from the setting status. If less than 16 addresses, press any button to exit from setting status. Current setting will be memorized, and previous setting will be deleted automatically.

Note:If you set Scene 2,just need give a different address,such as “D 01” ,to Scene 2,the next step is same as Scene 1.

Usage:

You can realize scene control after address setup. 

1 .Local control

(1)Press " ON" of one of the scene on the switch: If you add 16pc address into scene 1,then the 16pc light or appliance which controlled by the 16pc address will be open one by one. At the same time the LED indicator light of “ON” will lighted and the color of the words displayed on the panel is blue .

(2)Press “OFF” of one of the scene on the switch: If you add 16pc address into scene 1,then the 16pc light or appliance which controlled by the 16pc address will be close one by one. At the same time the LED indicator light of “OFF” will lighted and the color of the words displayed on the panel is red .

Note:The control method of both two scene is same.

2. Any high-speed bidirectional power line controller can control the switch, such as : wireless 

Switch's "N" connects with Neutral wire.

Usage:

You can realize scene control after address setup. 

1 .Local control

(1)Press " ON" of one of the scene on the switch: If you add 16pc address into scene 1,then the 16pc light or appliance which controlled by the 16pc address will be open one by one. At the same time the LED indicator light of “ON” will lighted and the color of the words displayed on the panel is blue .

(2)Press “OFF” of one of the scene on the switch: If you add 16pc address into scene 1,then the 16pc light or appliance which controlled by the 16pc address will be close one by one. At the same time the LED indicator light of “OFF” will lighted and the color of the words displayed on the panel is red .

Note:The control method of both two scene is same.

2. Any high-speed bidirectional power line controller can control the switch, such as : wireless