Ultrafiltration System with RO water treatment plant

1.Description of Ultrafiltration System with RO water treatment plant

Ultra filtration system utilizes a different molar weight cut-off (MWCO) to filter and separate a variety of small suspended particles, organic resin in the water, and reduces the TOC.It can be used before the RO system as pretreatment of raw water, and can be used at the end of ultrapure water system to remove small particles in pure water. The removal rate of organic matter is up to 99% and SDI<1, so that can increase water purification acquisition of the RO system, and extend the life span of RO membrane.UF uses “Inside-out”pressure type of hollow fiber membrane silk. The equipment could automatically collect water, back flush and so on with extremely easy operation to reduce the unstable factors caused by human operation and complicated management.

Our membrane filtration system uses advanced hollow fiber or ceramic technologies which operate in the outside-in or inside-out direction of flow. Given the small membrane pore sizes used with these technologies, fouling due to deposition of organic and inorganic compounds on the membrane may occur if the ultrafiltration system is not properly designed and operated. Therefore, we use automated backwashing, air scour and chemical flushing processes to restrict the rate of membrane fouling within acceptable limits. Chemical cleaning is employed once the maximum transmembrane pressure has been reached. Typical cleaning agents utilized include acids, caustic, surfactants, enzymes and certain oxidants, depending upon membrane material and fouling type.

We are a leading reverse osmosis system provider who are capable of engineering, manufacturing, site supervision, commissioning and operator training. We have been designing and building reverse osmosis filters since the early 1990’s and have hundreds of successful installations throughout the world. Like the rest of our water treatment equipment, all of our reverse osmosis systems are designed and built for the customer’s specification application. Taking into account the influent water quality and temperature, as well as permeation and concentration requirements, we are able to create custom solutions that are cheaper than other’s catalog offerings. The water filtration system can vary in size from a few gallons per minute to millions of gallons per day. Most of our designs include the required pretreatment systems (equipment and chemical) in order to reduce or eliminate fouling and scaling of the membranes.

2.Application of Ultrafiltration System with RO water treatment plant

3.Flow chart of Ultrafiltration System with RO water treatment plant

3.Feature of Ultrafiltration System with RO water treatment plant