new product 360 degree pir sensor lamp holder security light

360 degree pir sensor lamp holder  

Model: GD-360

The lamp will switch on automatically when somebody move in the sensor scope;

The lamp will switch off in setting time . 

It is widely used in the corridor, basement, bathroom, parking, storage, fire exits, and something else in the building.

Installation

1.Fix the holder in the place where you will want to install accoring to right figure.

2.After installation of the sensor, connect with lamp, then you could test it.

Test

1.After installation, Turned LUX knob clockwise to the maximum (SUN). Turned time knob anti-clockwise to the minimum(-).

2.Turn on the power, the sensor will be electrify and warm-up, 30 sec later, the item will be entered into working estate. 5-10 seconds after the light goes out for the first time and then sesing, the load shoud be worked.

3.Turns LUX knob anti-clockwise to the minimum. If it is tested under the circumstance below 3LUX, load should not work after induction load stop working; but if you cover the detection window with opaque object (towel etc. )  the load works, Under the condition of no induction signals, the load should stop workig within 5-15sec.

Note: when testing in daylight, please turn LUX knobto (SUN)  position, otherwise the sensor lamp could not work!

Description:

Product feature:

1. lamp holder adopt E27 international standard design, can install to use directly.

2. 360°around sensor design, shinning all around and high sensitivity.

3. Time, sensitivity and lighting control can adjust aourselves.

4. Can connect with different type of loads, such as bulb, saving-energy lamp and LED lamp.

Applicable scope: Public automatic illumination, stair passageway, corridor, fire exit, balcony, garage, entrance garden and other place requiring automatic illumination

International 86 style can directly replace the wall switch.

It is widely used in lighting showroom, furniture showroom, hotel and office.

It can replace traditional pull switch.

Foshan Shunde Geagood Electrical Factory is a manufacturer of infrared remote control switches, motion sensor switches, sound and light sensor switches and touch switches, with well-equipped testing equipment and strong technical force.

With a wide range, good reasonable prices and stylish designs, our products are extensively used in lighting and other industries.

Our products are widely recognized and trusted by users and can meet continuously developing relationships and achieving mutual success! 

FAQ

1.Quote conditions?

Quote in FOB ,CIF, EXW, etc. Normally, the currency can be used in USD or RAM.

2. Delivery time?

We have large quantities models in stock for normal color and size. It needs 3-5 days to customize for special color and size.

3. How to payment?

The payment can be T/T transaction. Western Union, Letter of credit. Paypal, EXCROW,etc.

4. How to shipping?

(1)     Normally, it will be shipped out by DHL, UPS FEDEX express or other air mail post ,etc for the weight no too heave and size small.

(2)     It will be shipping out by sea once the weight and size is huge enough.

(3)     The shipping way from our clients’ advise

5. Could you please send me the samples for our clients comfirm the quality, it is just afforded the shipping charge by the clients.