wood frames photo, desk frames photo, wall mounted frames photo

wood frames photo, desk frames photo, wall mounted frames photo 

 1.Frames photo specification 

2.Frames photo size:

3. frames photo components:pine wood frame+high clear picture core+plexglasswith high light transparency+black board with 360 degree rotatable pulling buckle.

4. Frames photo Installation:two ways.

Way 1:hooked on the wall 

Way 2:no traces installation on the wall 

Below is the details for the way 1

Step1:Tear the protective file from the plexiglass 

Step 2:Install the S shape hook into the middle of the backboard.

Step 3:Put the plexiglass-photo-backboard in order.

Step4:Tight the backboard by rotatable clip and pulling buckle into the slot of frames.

Step5:Upside the pulling buckle slightly if the photo or backboard loose.

Step 6:Choose the right position and then fix the module papaer by I-nail.

Step 7:Make sure the module paper in line by level tool.

Step 8:Knock the hook into wall position showed on the module paper.

Step 9:Tear the module paper and then connect the S shape hook onto the no trace hook.

Below is the details for the way 2.

Step 1:Make the photo position empty on the module paper.

Step 2:Fix the module paper onto the installation position.

Step 3:Tear the protective film from the plexiglass.

Step 4:Put the plexiglass-photo-backboard in order.

Step 5:Cut the blue.track into piece of 0.5cm long by knife.

Step 6:make the blue.track piece into ball shape.

Step 7:Paste the ball onto the frame.

Step 8:Make sure the module paper in line by level tool.

Step 9:Tea the module paper finally.

5. Frames photo logo could be silk screen way or marking way.

6. Frames photo  could be with different colors.

7.Frames photo OEM serive.

8.I am here for you.