Cost Effective Dual-Band Aruba AccessAruba Instant IAP-105-JP

Cost Effective Dual-Band Aruba Access103 Series IAP-105-JP  

OverView

Aruba Instant IAP-105 Wireless Access Point, 802.11abgn, dual radio, integrated antennas - Restricted Regulatory Domain: Japan

Aruba Instant IAP-105 Wireless Access Point, 802.11abgn, dual radio, integrated antennas - Restricted Regulatory Domain: Israel

Low-cost 802.11n Wi-Fi access points for devices in the 2.4-GHz and 5-GHz bands.

These high-performance 802.11n APs deliver wireless data rates up to 300 Mbps per radio and ensure peak performance by utilizing channel bonding, block acknowledgement and MIMO radios. Advanced antenna technology also increases RF signal range and reliability.

The 105 series of APs features two dual-band 2.4-GHz and 5-GHz radios with 2×2 MIMO and four integrated omni-directional downtilt antennas, making it ideal for warehouses and high-ceiling deployments. The 104 series features the same radios with external antenna connectors.

Benifits

• Wi-Fi Client Optimization:
  • ClientMatch™ technology eliminates sticky clients by continuously gathering session performance metrics and utilizing this data to steer mobile devices to the best AP and radio, even while users roam.
• RF Management:
  • Adaptive Radio Management™ (ARM) technology automatically assigns channel and power settings, provides airtime fairness and ensures that APs stay clear of all sources of RF interference.
• Spectrum Analysis:
  • Spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference.
• Security:
• With an OpenDNS service subscription, Aruba Instant delivers integrated web filtering, malware and botnet protection to every device connected to the WLAN
• Integrated Trusted Platform Module (TPM) for secure storage of credentials and
• SecureJack-capable for secure tunneling of wired Ethernet traffic

Specifications

Operating Modes:

• 802.11a/b/g/n Aruba Instant AP
• 802.11a/b/g/n Mobility Controller-managed AP
• Air monitor (AM)
• Secure enterprise mesh
• Remote AP (RAP) when used with a Mobility Controller
• Spectrum analyzer when used with a Mobility Controller

• AP type: Dual-radio, dual-band 802.11n indoor
• Software-configurable dual radio supports 2.4 GHz and 5 GHz
• 2×2 MIMO 802.11n with two spatial streams and up to 300 Mbps per radio
• Supported frequency bands (country-specific restrictions apply):
  • 2.400 to 2.4835 GHz
  • 5.150 to 5.250 GHz
  • 5.250 to 5.350 GHz
  • 5.470 to 5.725 GHz
  • 5.725 to 5.875 GHz
• Available channels: Managed by Virtual Controller or Mobility Controller, dependent upon configured regulatory domain
• Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
• Supported radio technologies:
  • 802.11b: Direct-sequence spread-spectrum (DSSS)
  • 802.11a/g/n: Orthogonal frequency division multiplexing (OFDM)
  • 802.11n: 2×2 MIMO with two spatial streams
• Supported modulation types:
  • 802.11b: BPSK, QPSK, CCK
  • 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• Transmit power: Configurable in increments of 0.5 dBm
• Maximum transmit power:
• 2.4 GHz: 23 dBm (limited by local regulatory requirements)
• 5 GHz: 23 dBm (limited by local regulatory requirements)

Power

• 48 volts DC 802.3af power over Ethernet (PoE)
• 12 volts DC external AC supplied power (adapter sold separately)
• Maximum power consumption: 12.5 watts

Atennas

• RF interconnect attenuation (between radio and connectors or antennas): 0.5 dB
• AP-104 and IAP-104: Four RP-SMA connectors for external single-band antennas
• AP-105 and IAP-105: Four integrated downtilt omni-directional antennas for 2×2 MIMO with maximum antenna gain of 3.0 dBi in 2.4 GHz and 4.5 dBi in 5 GHz

Warranty

Limited Lifetime Warranty.