Applicated for Belt Width 2200mm Impact Bed with Good After-sale Service

  As the awareness of safety and economy for mining further increases, the requirements for belt conveyors are higher and higher, where belting is of the highest importance. The Impact idlers are traditionally used to protect belts around the chute, however, which has several disadvantages, e.g.,too many rotating parts, too much maintenance, jams of big block of materials and small shock surface. We have developed a new-typed buffer bed, which can overcome these shortcomings. The Impact bed is of wide support surface and even strength, which can guarantee the surface contact of belts and reduce the belt sagging and materials spilling effectively. Moreover, the longitudinal tear of belts, which is caused by breakage and drop of idlers, can be prevented effectually, while the belt tear caused by sharp instruments or material can be reduced. For there is no rotating parts in impact beds, the regular maintenance is no longer required, and the operation cost goes down greatly .

l.The impact bed is mainly made up of impact bars, reinforced channel steel,supporting frame ,joints and so on. The impact bars are made of rubber bars and Ultra High Molecular Weight PU with special vulcanization technology. The rubber bars are made of rubber and frame by heat vulcanization, where the frames are made of special structural steel and used for increasing the strength and connection performance of rubber bars. The reinforced channel steel supports and protects the buffer bars. The supporting frame is designed and manufactured according to size of belt conveyors and trough angle of belt, which is fixed on the supporting frame of conveyors, supporting and strengthening the reinforced channel steel and impact bars.

2.As to the impact bars, the excellent high-elastic rubber layer can absorb the impact of the falling materials effectively, which reduce the damage caused by the falling materials greatly and improve the stress of the loading point significantly ;the top cover is made of Ultra Molecular Weight PU, which largely reduce the resistance between the belt and impact bars and are of high abrasive resistance. And all these ensure the products to be long-life and reliable.

3.The impact bars adopt antistatic and flame retardant technology, so the products can be applied in the working condition with flammable gas.

We offer the accurate technical and installation parameters that are feasible to our standard product to you so that you can make the best choices for the needs. If you have any special requirement for our product,Please let me know so as to send your needs to our engineer to deal with your problem by technical calculation on time. Above all,Please give us the accurate and comprehensive data about your project because the parameters are different according to multiple circumstances.It must makes you comfortable that we offer the professional high quality products to you.

LBHI possesses complete quality system certification, including ISO9001 Quality Management System Certificate, ISO14001 Environmental Management System Certificate, OHSAS18001 Occupational Health and Safety Management System and GB/T28001 Occupational Health and Safety Management Certificate. LBHI manufactures and provides products to customers complying with American standards, European standards and international standards and possesses EN-1090-2 structural steel-work certificate, LBHI also possesses more than 250 registered patents.

Quality Control

Our Company possess strict system of quality control to ensure the product quality as your requirements and Absolutely it will be applicable for your project.We invest a lot of money and human resources into the system every year so that it keeps its step for the international standard.

1.Packing:

We all take standard export packing cases made of exemption plates that thickness of the composite plates are about the 9mm to 15mm according with the export requirements.Of course,We also can take the wooden cases made of solid wood with fumigation and supply the Inspection Certificate of Fumigation.

2.Freight:

(1)Shipping:We cooperate with good international ship agency to ensure the interests of the buyer that the buyer can receive the goods in time.We usually accept liner shipping so that we should contact duly and co-operate on the freight peak to solve those problems of transportation.If you have any other requirements,Please tell us and consult with it.

(2)Express and Air transport:We also move goods by express and air transport if you really have emergency demand for these goods .But we can’t take the resulting costs and the scale of the goods must be small.

(3)International multimodal transport:The qualified MTO takes the transportation of the goods to make sure to arrive in terminal on time.We use container transport in general with the exception of special circumstances.

More products are waiting for you with best wishes and high quality

LIBO HEAVY INDUSTRY SCIENCE&TECHNOLOGY CO.,Ltd. is located at the foot of Mount Tai, as the state-level High-Tech Enterprise with integrated system of Production, Study and Research.We are specialized in the development and manufacture of complete sets and key components for bulk material handling, especially belt conveyors and stacker-reclaimer used in round stockyard.With the registered capital of ¥119.6millions, we are one of the largest companies in the bulk materials handling industry, which owns high-level technical equipment and comprehensive strength and offer full service for products

LBHI is known all over the world by its high-performance product,higher scientific and environmentally friendly mode of production.These characteristics make LBHI be the quality supplier and reliable business partners to many company in the world.

 FAQ:

1.I have some question about the insurance of goods.

Usually CIF to be effected by the sellers at 110% of invoice value covering Free from Particular Average(F.P.A.) as per China Insurance Clauses(C.I.C) dated 1/1/1981.OF course,if you need other service we also can cover with particular average(w.p.a.) or All Risks with War Risks.

2.How should I pay to my orders?

We support these payments as following:

1.30%T/T deposit +70% sight, confirmed and irrevocable L/C

2.100% sight, confirmed and irrevocable L/C

3.30%T/T +70% after seeing Ocean copy or fax of Bill of Lading

4.Other trusted platform for third-party to pay

5.Other circumstances

3.Can I take the goods by express or airlift if the need is urgent?

We can move goods by express and air transport if you really have emergency demand for these goods .But we can’t take the resulting costs and the scale of the goods must be small.

4.Can I know more Information about the packing and Freight of the product?

Of course you can,you can get the detailed the information in our “Packing and Freight” module of Product Details.You also can contact with us by phone, fax and e-mail.