16E1+1000M PDH Multiplexer

Specifications

16E1+1000M PDH Multiplexer

Features

Provide up to 16 E1 channels and 2 optional port 1000Mbps Ethernet channel

Fiber port bit rate:1.25Gbps, up to 100Km distance without repeater

Fiber port support 2 ports redundant backup and ALS* function

E1 Line code: HDB3, compliant to G.703, G.823 and G.742

E1 channel support both 75ohm or 120ohm impedance

Ethernet port support 1000Mbps auto-detection, Full/Half Duplex auto-negotiation

Ethernet port can transmit VLAN tag

Ethernet ports is divided to two group which can't communicate with each other

Complete alarm functions

Complete alarm functions

Description

16E1 PDH Multiplexer can multiplex 16E1 and 2 optional port Ethernet (1000Mbps line speed) signals in one fiber channel to transmit. It is suitable for low capacity, point-to-point application of remote transmission. The circuit part of the equipment is fully digitized. The whole equipment is reliable, stable, easy to install and maintain. It has good temperature and voltage characteristics, complete alarm functions, one RS232 asynchronous interface and remote loop back functions(from software). At the same time, it can be managed from management software Fi-View-MP through its Console port or through chassis FC-912

Specification

Optical Port
 Port number:1
Bit rate: 1.25Gb/s+/-50ppm
Wavelength: 1310nm, 1550nm
Distance: 0 - 100Km
Connector: FC/PC

E1 Port
 Port number: 16
Bit rate: 2.048Mbps(+/-100ppm)
Impedance: 75ohm or 120ohm
Line Code:HDB3, compliance with ITU-T G.703

Ethernet Port
Port nunber: 2 optional
Speed: 1000Mbps line speed
Duplex: Half/Full auto-negotiate
Frame Size: 64 - 1536 bytes
MAC address: 1k
MAC aging time: 5mins

Power Supply
Input voltage:When -48V, -40V ~ -60V (DC) is allowed
When ~220V, -175V  ~264V (AC) is allowed.
Overall power : 5W

Operating Environment
 Temperature: 0°C--45°C
 Humidity:95%,no condense

Standalone Size
483mm(L)×44.45mm(W)×200mm(H)
 Weight:2kg