PMAC806 motor controller

Specifications

PMAC806 Motor controller

PMAC806 is used to control the contactor in the AC circuit (rated voltage:3kv~~10kv). It integrates measurement, monitoring,protection and control functions.PMAC806 uses the design of module frame- work. It has the characteristics of small size, compact configuration, and extendibility.

Features :

12-way for external gathering

3-way for internal gathering

2 (Two) 4-20mA Analog input

2 (Two) 4-20mA Analog output

2 Ethernet port

2 PROT output

1 Alarm signal output

1 Softstart output

4 pulse output

2 Output

1 debugging port

Application:

1. Medium and high voltage MMP

2. Integrated process and electrical control

13 Standard Protections:

Overcurrent, Over/under load, Over/under voltage, Start Overtime, Overheat, Logical control protection, Non-electic, PT failure alarm, CT failure alarm, Under frequency, Synchrodyne

Other function:

Soft starting, Impulse energy, Integral energy, Motor start value record, Fault wave recode

Mesuring Parameter:

PMAC806 can measure and display below parameters:

1. RMS current of each phase

2. Three phase voltage

3. Zero phase sequence current and voltage   

4. Active power

5. Reactive power

6. Power factor

7. Harmonic (2~11st)

8. Frequency

9. Active energy

Communication:

Supports single/ dual network communication. It is fully qualified for network redundancy and backup.

•   2 standard RS4854 multipoint
•  communication ports
•  2 industrial Ethernet Ports(Option)
• Baud rate:2400bps,4800bps,9600bps, 19200bps,38400bps, 115200bps

Installation:

For more information, pls kindly contact us. Thanks in advance.

 ZHUHAI PILOT TECHNOLOGY CO., LTD.

Add: No. 15, Keji 6 Road, Chuangxin Haian, Tangjia Hi-tech Zone, 

Zhuhai, Guangdong, China    
Post Code: 519085 Tel: +86 756 3629687/ 3629673          
Fax: +86 756 3629600/ 3629700           
.cn