solar pump system for rice&paddy feild irrigation

Solar Pump System Introduction

Solar pumping system consists of four parts: solar panels, solar pumping inverter, Three-phase AC pump and water storage device. The solar pumping inverter converts DC power produced by solar panels to AC power which drive AC pump to pump water from borehole, river, lake etc. to the storage device.
This system applied for domestic water, agricultural irrigation, forest irrigation,desert control, pasture animal husbandry, rural town and village water supply and so on. The inverter applies a high efficiency MPPT algorithm to maximize power harvested from solar panels. It will make the system to reach max. efficiency to get the water as much as possible.

Project information:

Head: 139m, Flow Rate:1m3/h.

1.5kw solar pumping system project configuration

 Solar panels :

Solar array power: 8x1x250=2000W

Solararray operating voltage: 8x30=240V

Solar open circuit voltage: 8x36=288V

Moudule Specifications:

250W, polycrystalline moudule. P=250W, Imp=8.33A,  Voc=36V, Vmp=30V, Isc=9.16A

AC submersible Pump: 

1.5kw output 220V, 50Hz, three phase. Weight is 23kg, Diameter is 100mm.

The Application of the solar pumping system:

Solar pumping system can be applied in the area with sunshine and better to the areas lacking of electricity.

The system are main used for daily water using, agricultural irrigation,forest irrigation,desert control,pasture

animal husbandry,rural town and village water supply,desalinization of sea water,scenic fountain etc.