Grinding wood chips to sawdust machine in Russia 008615137127638

Grinding wood chips to sawdust machine in Russia 008615137127638 

1.Detail description of wood hammer mill

a.The wood sawdust machine can crush various materials, such as   branch ,pine wood, log, waste wood and so on.

b.This wood sawdust machine has the advantages of less investment, low energy consumption, high productivity, easy to maintenance etc.

c.The raw materials can be crushed into fine sawdust by this wood sawdust machine at one time, the whole machine uses one motor, simple structure, stable working condition. 

d.The sawdust size can be addjusted between 3mm and 22mm

e.it can crush nail in wood

2.Feature of wood hammer mill

It is composed of machine body, knife chipping part, chips re-crushing part and sieving part,etc.it combines both chipping and crushing in one machine, and it can make sawdust in one passage, no need to use wood chipper for pre-processing of wood logs.

This is a new type of ideal mechanical machine to produce the wood powder, which combine the domestic and foreign advanced technology together. It has less investment, low energy consumption and high productivity, good economic returns, and convenient maintenance. This machine is particularly suitable for processing wood shavings for making edible fungi. It is composed of chipper device, crushing device and fan device.

1).enery-saving 
2).low noise 
3).compact structure 
4).environmental

5). CE 

3. Application scope of wood hammer mill
It can be used for producing charcoal,briquette press, blocking making, pellet, sawdust press etc, the raw material
we can choose corn/cotton etc straw,wood sawdust, sugarcane, chipper etc, 

1. Installed with a new kind material, it has the function of sound insulation and heat dissipation. Thus the machine has little noise and no vibration in use. Besides, beautiful structure and durable, it offers high output, with efficiency rising 50% or above than conventional wood flour machine. Therefore, it is an ideal high-tech equipment that is irreplaceable by any other crushers.

2. the feed port of the machine is the autosuction type so that it can ensure the safety in production. it is superior to conventional crusher which is subject to direct feeding and will be damaged by metal blocks.

 4.Parameter of wood hammer mill 

5.Operating rules for wood hammer mill 

1). After installation, start the blower, check the direction it runs and see if the suction at the material inlet is normal.

2). Tie up a bag whose both ends are open around the outlet of the dust catcher.

3).Feed the material to be dried to the hopper. Remove large grain in the material before drying, which will benefit drying speed.

4). Put fuel into the furnace and light it, start the blower. When the air temprature at the outlet of the blower get to 100°C, begin feeding and drying.

5).Large piece of the material at dregs-outlet must be removed, which is favourable to feeding. 

 6.Cautions of wood hammer mill

1). The machine must be grounded well.

2).The exhaust vent of the dust catcher must not be indoor, a flue pipe should be made to exhaust the gas outdoor, and the chimney must be at least 500mm higher than the roof.

3.) The large grins of material should not put into the hopper.

4).When material does not get in easily, check the vane of the blower, remove the dust sticking to it.

7. Pictures of wood hammer mill

  Any questions about wood hammer mill contact me.

 Victor Lu  008615137127638

 Skype: chinavictor6688