China manufacturer solar water pumps for water features

China manufactory solar water pumps for water features

SPECIFICATION:

ThePower of Solar Battery:8V, 2.2W         

The Size of Solar Battery:170 MM*250MM   

The Battery:NI-MH 4.8V/1000MA

The Power of Pump:DC3.5-12V,0.5-5W

Max Flow Quantity of Pump:150-280L/H

Max Water Height of Pump:40-70cm

Installation instructions:

1.Attach the pump to the solar panel before use, plug the sprinkler head or hose into the outlet of the pump,make sure the water level covers the pump, but is lower than the sprinkler head.

2.Plug the power line of the pump into the plug of the solar panel, and then fasten.

3.Position the solar panel in full sun to optimally run the pump, the backup battery will be charged from the solar panel during normal operation and automatically run the pump without sunshine.

4.If required the pump can be run by the battery in times of low sunlight. Turn on the switch at located at the back of the solar panel,if the battery is fully charged the pump will start to work immediately.

5.If the switch is turned off ,the pump will be operated by the solar panel only.

Assembly drawing

Notes:

1.  If there is no water, disconnect the pump from the battery and solar panel, running the pump dry will reduce the life of the pump.

2.  If the fountain is not used or before transport, please disconnect pump from the battery.

3.  Periodically clean the pump filter after use for long periods of time.

Figure photos:

Qualification & certification:

History order;

Customer visite:

Export countries: