China electric 8m mobile scissor lift for car lift use

electric stationary scissor lift table offered find high suitability for lifting heavy loads to higher heights and can achieve maximum lift height of 40 feet (12 m). We make these available in operational capacity range from 200 kg to 10000 kg and in superior finish standards that make these easily handle movement of loads to different levels. Offering easy loading and unloading interface, these lifts can also be custom built in different sizes & capacities as demanded by the customers.

Features:

• Suitable for lifting heavy loads to higher heights
• Maximum lift height 40 feet (12 m)
• Capacity ranges from 200 kg to 15000 kg

1. This model of lift is designed and produced based on customers’ special requirements: load capacity, lifting height, platform size and power supply.

2. Two mainly types according to different sites. One is to be sited on a special place to loading cargos and then lifting to a certain height and move the cargos.

3. They other type sited into a lift pit. The table of lift is in the same level with the ground which is convenient to move the cargo onto it. In this way it also called freight elevator.

Control panel on the bottom:

Control panel on the top platform:

Our delivery is Efficient , Reliable ,and Prompt!

Packaging Detail:

Electrical parts are packed by crate wood,other parts are nude package ,or as client demand.

Delivery Detail:

· If the size is suitable for container ship, usually by container;

· If the size is too big, usually by bulk ship or by container after truncation;

· Transport ways are based on reducing cost for you and keep the crane performance!

Safety:

1. Control Device:Calling box (installed on the wall nearby) and remote controller(Extra optional)

2.Emergency Stop:The lifting and lowering process can be stopped immediately by 

   pressing the emergency button.

3. Safety Interlock: Lock the platform when it is out of control

4. Emergency lowering:The platform can be lowered by opening hydraulic valve manually or rolling screw rod.

5. The lift has hydraulic overload protective organization to ensure that equipment will not lift when the load beyond its rated load capacity.

6. The machine equipped single control solenoid valves to prevent the platform dropping if power failure. You can open the manual dropped valve to lower the platform to the home position.

Service:

We also supply spare parts and supply technical supporting all the time. (Spare parts: control button, travel switch, Oil cylinder seals and the wrench etc.)

  When you find us dont forget to tell us the lifting height and load

capacity and the table size of the lift you want...