waste rubber crusher type for XKP-400/xkp450/xkp560/xkp660

1

1.Detailed informations:

This machine is made up of one base, frame, front rollers, transmission gears, deceleration machine, adjustable from device, the temperature adjusting device, cutting knife components, the winder structure, safety switch and electric control system composition.

The rollers material for cold hard alloy iron, has high hardness &abrasion resistances. The temperature adjusting device, may to the general rollers within the steam and cooling water adjust the temperature to meet the technological requirements.

Turn the handwheel recoiler constitutive winding roller, can adjust the desired.

The machine is equipped with an braking brakes, emergencies, pull the security lever can immediately brake, which reduces the personal accident.

2. Application

It is used for cracking crude rubber, waste tire rubber, tube and breaks rubber materials.

3. Features

1. The rolls are made of chilled alloy cast iron with wear-resistant and hard surface; the back roll is groove one

2. the front roll is smooth.

3. The protective device is provided to protect the main parts from damage due to overload

4. The reverse current plugging system is provided above the rolls. In case of emergency, the safety rod is pulled down and the rolls will stopped immediately

5. Roll gap can be adjusted conveniently by turning the handwheel

6. The bedplate of the machine is integral or separated, so the nstallation is convenient

7. The transmission system adopts either hard tooth flank dual axis reducer or NGW hard tooth flank planet reducer, which has compact structure, lose noise an high efficiency

8. The seal structure with special design can eliminate the leaking phenomenon of lubricating oil

4.Parameter of the Rubber Cracker: