waste rubber crusher/old tyre crusher/rubber crumb processing machine

waste rubber crusher/old tyre crusher/rubber crumb processing machine:

1.Detailed informations:

This machine is made up of one base, frame, front rollers, transmission gears, deceleration machine, adjustable from device, the temperature adjusting device, cutting knife components, the winder structure, safety switch and electric control system composition.

The rollers material for cold hard alloy iron, has high hardness &abrasion resistances. The temperature adjusting device, may to the general rollers within the steam and cooling water adjust the temperature to meet the technological requirements.

Turn the handwheel recoiler constitutive winding roller, can adjust the desired.

The machine is equipped with an braking brakes, emergencies, pull the security lever can immediately brake, which reduces the personal accident.

2.Chracteristics:

1.Transmission with quality. 

2.The rolls are made of chilled cast iron with wear-resistance hard surface. 

3.The rollers are grooved.

4.The bored rolls can be cooled through inputting the steam  and colling water. 

5.The two rollers rotate with different speed ,so that rubber material can be processed

6.The Excellent crushing structure is open gear transmissions 

7.The product has ISO9001 CE standard and SGS certification . 

3.Parameter of the Rubber Cracker:

The machine is equipped with inner tube and tire tread extrusion heads ,and can also be equipped with other extrusion heads as required by users.
2 A machine body temperature measuring and indicating device is installed.The feeding zone over 150 is equipped with side rolls for the enhancement of feeding capability.
3 The screws and bushes are subjected to nitrogenation treatment to get enough strength and wear-resistance.
4 The reducer has a forced lubrication unti,which is featured by high transmission efficiency,long service life and low noise.
5 The machine over 150 is driven by a variable-speed motor.
6 The side rolls are designed as side-open type for easy rubber re

1 The machine is equipped with inner tube and tire tread extrusion heads ,and can also be equipped with other extrusion heads as required by users.
2 A machine body temperature measuring and indicating device is installed.The feeding zone over 150 is equipped with side rolls for the enhancement of feeding capability.
3 The screws and bushes are subjected to nitrogenation treatment to get enough strength and wear-resistance.
4 The reducer has a forced lubrication unti,which is featured by high transmission efficiency,long service life and low noise.
5 The machine over 150 is driven by a variable-speed motor.
6 The side rolls are designed as side-open type for easy rubber removal.

moval.