Outside Cooling Vest For The Workers

1. Why we need cooling vest?

We need it to protect ourself from heat stress. Reduce the risk for heat stress, and keep us feel cool.

2. What is Heat Stress?

Heat stress occurs when the body's means of controlling its internal temperature starts to fail. Air temperature, work rate, humidity and work clothing are all factors which can cause heat stress.

3. Typical example of a heat stress situation

Someone wearing protective clothing and performing heavy work in hot and humid conditions could be at risk of heat stress because:
■ Sweat evaporation is restricted by the type of clothing and the humidity of the environment.
■ Heat will be produced within the body due to the work rate and if insufficient heat is lost deep body temperature will rise.
■ As deep body temperature rises the body reacts by increasing the amount of sweat produced, which may lead to dehydration.
■ Heart rate also increases which puts additional strain on the body.
■ If the body is gaining more heat than it can lose then the deep body temperature will continue to rise. Eventually it reaches a point where the body's control mechanisms start to fail.
The symptoms will get worse the longer someone remains working in the same conditions.

4. What are the effects of heat stress?

5.How can I reduce the risks?

■ Control the temperature

■ Provide mechanical aids

■ Prevent dehydration

■ Provide personal protective equipment

■ Provide training

■ Allow workers to acclimatise

■ Identify employees who are more susceptible

■ Monitor the health of workers at risk

Summer is coming. It's that time of year again.

In many jobs heat stress is an issue all year round but this information also applies during the hot summer months where there may be an increased risk of heat stress for some people.

Introduction

Main Technical Parameters

The main technical parameters of Cooling Vest are as below:

The main technical parameters of Phase Change Cooling Inserts are as below:

Key Benefits

Cooling Vest Apparel

1. The phase change vest has fast heat conduction speed and use close-fitting design. Suitable for staff wear air breathing apparatus and all kinds of protective clothing.

2. Cooling vest is designed as front opening zipper, armpits and shoulder can adjustable, suitable for all size people to dress.

3. The design of Insert position has avoided the important acupoint of human body, to prevent insert bring any discomfort.

4. Light weights, wear weight are 1.93 kg, feeling no weight. Does not affect work and sports.

Phase Change Insert

1. Phase change materials are gel-like, non-flow and without straining feeling, environmental protection non-toxic formula.

2. Phase change insert is non-poisonous and non-corrosive, it also can natural degradation and non-pollution.

3. Phase change insert is designed to be Mosaic layout, facilitating cold energy evenly dispersed.

4. These inserts have the magic tape to prevent the inserts from slipping down in side the pocket of the vest.

5. The phase change inserts may be re-used over and over again by simply put it in a fridge. Durable & reusable.

Application