china silicon rubber Sealant(white)

FOB Price

US$ 3.6 - 3.8 / Piece

1000 Pieces(Min. Order)

Port shanghai
Payment TermsT/T

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Place of Origin	Jiangsu, China	Classification	Double Components Adhesives
Main Raw Material	Silicone	Usage	Construction, Other, Transportation, Construction, Fiber & Garment, Transportation
Brand Name	concatemer	Model Number	KDW-1536

Product Description

Specifications

1.excellent liquidity
2.resistance to impact resistance UV
3.Electrical performance special fine.

Operating instructions:

1. Clean surfaces: Is stuck or is been clean by the spreading surface reorganization, except rust stain, dust and greasy dirt and so on.

2. The glue: With a blade cut open the front part, cover on pointed tips mouth, with extrusion gun will glue crowded to already clean surface. Will be sticking surface to close up fixedly.

3.Solidification: Will paint the part sets in the air, lets its room temperature solidify 5-20min and watch to do, completely solidifies apparent thickness to decide(the 3mm thickness ,the room temperature 25°C, the humidity50%,24hours may completely solidify. Solidification limit thickness is 10mm).

Contains: Poly (dimethyl silicone polymer); Silicon dioxide ; vinyl oximinoslae; calcium carbonate.

Matters needing attention;

1. The pressure connected to the applicator should be 0.2-0.4Mpa when using pneumatic applicator.

2. Please in well ventilated place is good, if contact with eyes or skin, please rinse immediately.

Store: Store in dry shade under 28 °C degrees away from children.

Main Characteristics of Silicone Rubber KDW-1536
Before cure	exterior	white/black
	viscosity pa.s	~
	surface curing time min	5-30
After cure	temperature-resistant °C	-60~+250
	tensile strength Mpa≥	4
	elongation %≥	250
	shaw strength A≥	25
	sheating strength Mpa≥	4
	racking strength KN/m≥	5
	electrical surface resistivty Ω≥	1×10¹⁴
	electrical volume resistivty Ω.cm≥	5×10¹⁴
	specific inductive capacity 1MHz≤	3.5
	dielectric loss angle tangent value 1MHz≤	5×10^-3
	insulating strength KV/mm≥	20
	maximum curing depth mm	7~10

Contact Us

Liyang Kang Dawei Industrial Co., Ltd.: Contact namejinjin hu
Chat Now; Phone86-519-87985663; Address8#Yunmei Road,Tianmuhu Lake Township Industrial Park ,Liyang City, Jiangsu Province, Changzhou, Jiangsu

*Email
Please enter Your valid email address.
*To

jinjin hu
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Anti-pollution flashover coating	Chimney anti-corrosion coating	Electronics sealant	New Products
Other	Solar panel sealant

china silicon rubber Sealant(white)

You May Like

Product Details

Product Description

Specifications

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category