Blister Packing Machine

Specifications

ALBLIS-I is a versatile ‘Flat Plate’ intermittent motion automatic blister packing machine that can produce Alu-Alu blister packs by cold forming method as well as PVC-Alu blister packs by thermoforming method. This machine is utilized for packing of smaller and regular shaped solid articles such as pharmaceutical tablets, capsules, dragees etc., in Alu-Alu or PVC-Alu blister packs. This machine can also be used for packing of Ampoules, Vials, Tubes as well as cream. paste, jam etc in PVC-Alu blister packs. The Blister Forming, Sealing, Indexing and Punching operations are of intermittent reciprocating motion. Various types and styles of product feeding devices are offered to suit different application.

The output capacity of the machine depends on the product characteristics and thus on the type of feeding device. Normally for cold forming operation to produce Alu-Alu blisters this machine would operate at 25 cycles per minute and for thermoforming operation to produce PVC-Alu blisters it would operate at 40 cycles per minute.

The packing materials namely cold forming laminated Aluminium foil or thermoforming PVC film and the lidding material namely Aluminium foil (or Glassine Paper foil) with heat sealable VMCH lacquer are required for blister packing and are drawn off from reel stock. The blister packs, which are punched out from main web, can either be collected in bins or transferred over a conveyor belt for further handling. The trim waste is wound on a roll for easy disposal.

The standard configuration of machine is for producing of Alu-Alu blisters suitable for pharmaceutical tablets, capsules, dragees etc. The standard configuration may be opted out or can be combined with other configurations.