Dry Mixed Cement Mortar Interior Wall Putty

ANT-621 dry mixed cement mortar  interior wall putty ,other name: polymer cement based interior wall putty,it  is a special polymer modified Portland cement based putty. It can be used as bottom layer treatment of interior wall decoration or interior coating through stirring the product manually or electrically(the thickness of stirring coating is less than 3mm). 

The technical performance

1,excellent binding property, no shell, no peel, no surface picking  2,waterproof,crack resistant

3,good sanding property                                                               

Applicable Scope    

It’s applicable to interior wall,gypsum board,aitken board,concrete wall,cement wall and so on.

The base surface requirements:   

The base surface should be dry, solid, smooth, no crack, oil pollution dust.

The mixing and coating technique  

1, please stir once the putty manually or electrically to use, do not need to add water if you stir it again.2,first,please plaster the putty on the base surface,then plaster it evenly by steel trowel,next,planish the putty by emery paper when it dry,finally,plaster the coating or stick the wall paper.

2, it needs about 1.0-1.5kgs per square meter if the thickness of putty is 1mm.

Attention:    

The construction temperature is 5°C-35°C,please use the well-stirred product within 2 hours.This product contains alkali, please be careful of your skin and eyes. Please refer to the instructions of our products or contact with us.

Storage and packing:  

This product can be stored for 9 months under seal in cool and dry place. packing: 25 kgs/bag,24 tons per 1x20' container.

Payment terms:L/C or T/T.

Delivery time:4 days after the receipt of deposit.