Tire Retreading/Tyre Retreading machine/Curing Chamber

Tire Retreading/Tyre Retreading machine/Curing Chamber

Specification:

1.:Dia.  1.5x1.5m  4pcs  tire
             1.5x2m    6pcs  tire
             1.5x2.5m  8pcs  tire
             1.5x3m    10pcs tire
             1.5x4m    12pcs tire
             1.5x5m    16pcs tire

2.Function:Precure vulcanisation heating,equip with air cooling circulation motor
4.Heating way:electric,heat transfer oil,steam
5.Range of tire size:Within Size of 12.00-24 Truck and Passage Bus Tyre
Detail:  
1. Automatic alarm, automatic timing.   
2. Automatic door and three triplock for safty. 
3. 2 tyres backup space for expanding output.
4. PID/PLC system controls temperature, pressure, curing time.
5. Automatic compensation function on temperature, pressure.
6. Same price with three kinds heating for selecting:electric heating, steam heating, thermal oil heating.    
7. Standard one is electric heating, if select oil heating, extra add a conduction oil stove.
8. The cooling circulator motor available.

We also supply tire retreading industry solutions(whole retreading line) for clients who want to set up a new retreading factory/plant for used tyre recycling business.

Benefits of tyre retreading:

1.The benefits of retreading are  both environmentally friendly and cost-efficient! When the tread has worn off, only about 20% of the tyre is used up. The carcass, which represents about 80% of the tyre's value, can be re-rubberized for a "new tyre life".

2.To produce a truck or bus tyre requires about 60-80 kg of rubber mixture. Retreading the tyre takes only about 15 kg of rubber. A considerable amount of raw materials can therefore be saved. In the EU, this equates to more than 300,000 tones per year!

3.To produce a car tyre requires about 28 litres of crude oil. To retread a car tyre, on the other hand, only 5.5 litres of oil are needed.

 It is never difficult to find numerous suppliers,but it is difficult to find a good partner.