waterproof coating covering material interior wall coating material

Specifications

   waterproof coating covering material interior wall coating material    

1.PRODUCT STRUCTURE:

2.PRODUCT DETAILS: 

3.OTHER PRODUCTS:

4.HOT SALE SPECIFICATIONS:

5.APPLICATION

A.Interior Wall

B.Ceiling 

C.Exterior Wall 

7.PROCESSING

1) Saw Cutting

It can be easily processed with wood product processing saw and plate saw.

It's recommended to use hard alloy blade.

2) Slotting

It's important to make the U type slotting process with a distance 0.2 to 0.4mm from the polyethylene substrate,recommended slot angle is 110.

A.Milling machine and trimmer.Running speed:20000-30000rpm Feed speed:3-5m/min

B.When processing large quantity of U type slots,it's recommended to use round saw and belt saw. 

flakeouter diameter:305mm number of teeth:24 running speed:3,000-5,000 rpm

3) Bending with panel folder

If operated on the platform,bending part can be made very tidy.Platen puncher,plate folder or bending dies are applied as bending equipment.

The recommended temperature for bending is over 10°C.

4)Bending with panel bender

When plate folder is used to finish the  panel,dies shall be placed on with appropriate radius

 5) Riveting

Countersunk rivet can realize easy joint from one direction

6) Bolting

Considering from deformation limit,formul e>2D is the best calculation way of aperture D and distance from hole center to plate end.

8.PACKAGE

1.In wooden Pallet

2.In Bulk(with strong wooden fix the panel)

9.CERTIFICATIONS