800 hd Cable Receiver DM800C SIM2.10 New dvb 800hd

DM800hd DM800 hd Cable Receiver DM800C SIM2.10   New dvb 800hd

Specifications

DM800 HD PVR 
1 Year Warranty 
Bootloader84 ,Gemini5.1,SIM 2.01 
Linux System, 
Japan Alps M Tuner

1. Bootloader R84

2. Gemini 5.1

3. SIM 2.10

4. DVB-S/C/T Tuner available

5. 300 MHz MIPS Processor

6. Linux Operating System

7. 800HD PVR already

300 MHz MIPS Processor Linux Operating System OLED - Display MPEG-2 / H.264 Hardware decoding Tuner: DVB-S, optional: DVB-C, DVB-T Tuner Module, Plug&Play 1 x Smartcard-Reader (Dreamcrypt CA) V.24/RS232 Interface 10/100Mbit Ethernet Interface 1 x Scart (RGB, FBAS or S-Video) DVI 2 x USB 2.0 analog modem S/PDIF Interface for digital bit stream out (AC-3) 64 MByte Flash, 256 MByte RAM SATA for use either as internal SATA HDD 2,5" to use for extern eSATA unlimited channel lists for TV/Radio channel-change time < 1 second automatic service scan directly bouquet-lists EPG (electronic program guide) multiple LNB-Switching control (supports DiSEqC) OSD in many languages and skin-support Videotext Decoder extern 12V power supply

DBS-Tuner mit DVB-S2:

Frequency Range 950 .... 2150 MHz Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK) Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC DVB-S2:  10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK)

Video decoder: Video Compression MPEG-2 and MPEG-1 compatible, H.246 Video Formats 4:3 / 16:9 Letterbox for 4:3 TV-Device

Audio decoder:

Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3 Audio Mode Dual (main/sub), Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:

Output Level L/R 0,5 Vss on 600 Ohm THD > 60 dB (1 kHz) Crosstalk < -65 dB

Output digital:

Output Level 0,5 Vss on 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical, Toslink Ausgang Video: Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm

Video parameter:

Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:

Output: FBAS,RGB,S-VHS over OSD selectable Serielle Interface RS 232: Typ RS232 bidirectional Bitrate 115,2 kBit/s max. Plug Connector SUB-D-9 Function Update of Firmware and Preprogramming

Ethernet:

100 MBit compatible, bi-direktional interface Function Update of Firmware and Preprogramming

Analoge modem

analoge modem for Internet connection

SATA Interface:

- for use either as internal HDD 2,5“ or eSATAor internal 2,5" HDD 2 x USB 2.0 Host

LNB power and polarisation per tuner:

LNB Current 500mA max.; short-circuit-protected LNB Voltage vertical < 14V no load, > 11,5V at 400mA LNB Voltage horizontal < 20V no load, > 17,3V at 400mA Count of active satellite position: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control

Power consumption:

< 15W at 12V

External PSU

Input: 110-240V AC / 50-60Hz / 0,6A Output: 12V = / 3,0A