1.5m Diameter*3m Long Pneumatic Rubber Fender/Buffer

1.5m Diameter*3m Long Pneumatic Rubber Fender/Buffer

Dear  Customer:

Welcome to our website and hope our products will make you satisfied .

We think creatively,design bravely,manufacture precisely and loyalty to 

our customers. And we have our own  We can produce the products 

according to customer requirements .

     Give us a negotiate chance will yield you a surprise

                                                                               Yours

                                                                  LuXiang

Parameter    1.5m Diameter*3m Long Pneumatic Rubber Fender/Buffer

Product pictures    1.5m Diameter*3m Long Pneumatic Rubber Fender/Buffer

1.What is floating pneumatic boat fender with tire chain ?

Fender which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to

float on the water and work as a shock absorber between two ships or between ships and berthing structures

when they come alongside each other on the water.

Note:The fenders sometimes be colloquially referred to as "Yokohama fenders" or "yokohama type fenders".

        These are examples of suitable products available commercially.

There is a picture to show how Pneumatic rubber marine fender working-------------------->>>>

Two types Pneumatic rubber marine fender 

1)Sling-type fender:fender which is designed to be used without a protection net.

2)Net-type fender:fender which is covered by a protection net consisting of chain and

with tyres or rubber sleeves.

Product Structure  1.5m Diameter*3m Long Pneumatic Rubber Fender/Buffer

The raw material of the Pneumatic rubber marine fender is natrual rubber +synthetic-tyre-cord fabric.

Product Advantages and detail pictures 

1)Outer rubber layer

Rubber layer that covers the outside of the fender to protect the cord layers and the inner liner rubber from

abrasion and other external forces.

2)Inner rubber layer

liner of a rubber membrane that seals the pressurized air inside the fender.(In general,we will make some inner

rubber container in advance and inflate them.few days later,we will test the pressure again.The one which it's

pressure did not change is good one.We will put it into store and when clients order we can use it directly.

This can ensure every fender we send to client is airtight one)

3)Synthetic-tyre-cord layer for reinforcement layer

layer made of synthetic-tyre-cord fabric which maintains the internal air pressure of the fender.

4)Flange opening

which is mounted on the fender to which an air valve can be adapted.(our flange are all

Embedded welding, very stable)

5)Initial internal pressure

Air pressure at which an uncompressed fender operates.

Application    1.5m Diameter*3m Long Pneumatic Rubber Fender/Buffer

Is widely used in ocean shipping, marine facilities, offshore platform, port and dock, yacht and other fields.

Preparing materials   1.5m Diameter*3m Long Pneumatic Rubber Fender/Buffer

Product package   1.5m Diameter*3m Long Pneumatic Rubber Fender/Buffer

Our Services   1.5m Diameter*3m Long Pneumatic Rubber Fender/Buffer

1)We will give reply within 24 hours   1.5m Diameter*3m Long Pneumatic Rubber Fender/Buffer

2) lifelong after-sale service     1.5m Diameter*3m Long Pneumatic Rubber Fender/Buffer

7.We will give Installation and maintenance Manual   

Our certificates   1.5m Diameter*3m Long Pneumatic Rubber Fender/Buffer

Company profile   1.5m Diameter*3m Long Pneumatic Rubber Fender/Buffer

Our customer   1.5m Diameter*3m Long Pneumatic Rubber Fender/Buffer

Contact  1.5m Diameter*3m Long Pneumatic Rubber Fender/Buffer