JZ brand heat press machine for t shirt hot sale

JZ brand heat press machine for t shirt hot sale

Technical parameters:

Voltage: 220 v / 110 v
Temperature: 0-399 degrees
Power: 2000 w
Time: 0-99 hours
Table size: (38 * 38 cm) (40 * 40 cm) (40 * 50 cm) (40 * 60 cm) (60 * 80 cm)
Weight: 125 kg

This machine can be sublimated, solvent ink color patterns and text of the adopt of the thermal transfer on the fabrics such as cotton, hemp, chemical fiber, also can be flocking pyrograph and foaming printing process such as heat treatment. Convenient and practical!

1. This machine can be used for digital sublimation transfer printing, good-sized billboard and piece of garment transfer printing.

2.Automatic Pneumatic operated pressing , Fully digital temperature contral, temperature readout accuracy +/-2

3.Adopted hydraulic equipment, then with strong and even pressure. It has high efficiency for two working plates. and temperature style heat equipment adopted, making heat quickly and even.Printing area is bigger.

Product features:

1)Full automatic control, signal indication for completely work, high accuracy;

2)Heat pipes and the heating plate note is an organic whole, safe, durable, heat distribution uniformity

3)The automatic digital display time control;

4)Convenient pressure adjustment; Widely used in factory assembly line work.

5)Elegant and beautiful.

Operation process:

Notice: the machine must have a suitable firm on the ground protection.

1. Open the power switch, adjust the temperature pressure to the required time requirements.

2. When the temperature reached, turn switch to "manual" position, try for hot products, quality approval rear can switch to "automatic" position batch production.

3. When the switch to "manual" position, press the "start" manually by hand hot plate to press when the time to rise

automatically, such as found in the process of hot stamping location is wrong, then click on the "emergency stop" to suspend the hot pressure, when the switch to "automatic" position, just push the hot plate in place is fever down automatically.

Maintenance:

1. The pressure:if pressure is not enough or too big, you can adjustable the pressure regulating valves, cylinders to increase pressure in the direction of (+), reduce pressure in the direction of (a) (please note that if there is a lubricating oil cylinders).

2. Temperature: when the device temperature after heating plate no fever or fever not divide evenly, should check the circuit temperature controller and thermocouple, such as thermocouple is broken, there is a break line indicator light on the thermostat, the thermocouple should be changed.

3. Time: when the switch to "manual", press the "start" manually will not press, check the "manual" switch when the switch to "automatic", bedplate in place when not down, should check whether the micro switch contact point in the cabinet in place, if you don't have a should be adjusted.

4. If quality problems, please contact with the company in time.