1cm by 100cm Flexible EL(Electro Luminescent) Light Tape with Portable 3V EL Inverter

in carton

1cm by 100cm Flexible EL(Electro Luminescent) Light Tape with Portable 3V EL Inverter

1) 1piece 1cm X 100cm EL Tape. Please confirm the EL Tape colors( AOWO,WOPO or BOWO, etc) when you place the order;

2) 1piece INV001(3V-2*AA not inclulded) EL Inverter.

EL(Electro Luminescent) Light Tape  which also known as EL strip, EL light, etc. is unsurpassed for lighting paths, steps and walkways, DIY novel lighting, outlining any sort, lighting around boat or car, even on a bike, clorthing etc. It comes in a variety of lengths and widths and currently available in many colors. It is extremely energy efficient, using less than 50W/sq m, even with an illumination at a brightness of 100 cd/m2. By far the most efficient lighting element today, greater than LED's, florescent, neon, incandescents, halogens, and more, EL Tape is what you need. EL Tape is thinner than a credit card, can be bent around nearly any surface for hundreds of feet.

EL(Electro Luminescent) Light Tape needs an EL Inverter(power supply) to run EL tape. EL Tape is an easy system that consists of 3 elements, EL Tape (with lead wire and connector), Inverter (power supply) and a mounting extrusion for exterior applications. Generally intended for indoor use, EL Tape is also available by special request in a waterproof casing which will allow outdoor usage. Double Sided tape can be used to mount the EL Tape or a simple laminate.

EL(Electro Luminescent) Light Tape Features:

Cool to touch, flexible in length, easy to connect and disconnect, very low power consumption, interior and exterior lighting.

EL(Electro Luminescent) Light Tape Specification:

Size: 1CM*100CM, 1CM*200CM, 2CM*100CM, 2CM*200CM, 3CM*100CM, 5CM*100CM etc.

Lighted area thickness: 0.3MM(+/-0.05MM);

Lead portion thickness: 0.4MM(+/-0.05MM).

Color: White on pink off, Blue-green on white off, Green etc.

Please to tell us the color you like when you pay.

Lead wire: 20 centimeter with connector(both ends with connectors, you can cut it into 2 pieces EL Tape easily)

EL(Electro Luminescent) Light Tape Accessory-Inverter:

All EL products needs an Inverter to power it. These inverters start with 3Volts (for a 2 *AA battery inverter), 5V Volts, 6V Volts, 9V Volts, 12Volts or 110~240Volts power supply and then transfer the voltage around 100Volts and frequency around 1000HZ that makes the Electro-Luminescent Phosphor in the wire glow brightly.

Disclaimer:

The commodities demonstrated the color can with material object some chromatic aberrations, the color all take attain the material object as.

EL Products from Shenzhen Linda Electronics Co.,Ltd.

We very much look forward to working with you and are here to answer any questions you may have.