ADSL loop extender can extend the coverage of ADSL lines. It will provide systems with higher performance-to-cost ratio, improve the equipment utilization rate and optimize the network. This product will allow you to double the number of subscribers that you can reach while offering more consistent high bandwidth services to your existing customers.

ADSL loop extender is an active element installed in the outside loop plant. It operates as an amplifier and equalizes the signal.

ADSL loop extender’ box and the business card are as below:

• AER800-1P box: One box for 1 AER800-1P embedded.
• AER800-2P box: One box for 1 AER800-2P embedded.
• AER800-4P box: One box for 4 AER800-C1P and 1 AER800-PWR embedded.
• AER800-8P box: One box for 8 AER800-C1P and 1 AER800-PWR embedded.
• AER800-C1P: One port ADSL loop extender for one ADSL subscriber, can be inserted into the extender’s box easily.
• AER800-PWR: One port power supply, which can power for 1~8 AER800-C1P cards, can be inserted into the extender’s box easily.

Benefits

• ADSL subscriber can be added by inserting the business cards AER800-C1P.
• Economize the copper pairs for one additional pair can power eight ADSL subscriber.
• Comprehensive over-voltage protection.
• Easy to install, deploy and maintain.
• Low power consumption and more environmentally friendly

Technical Specifications of AEC-B1P/B4P/RACK

L1: The signal twist pair connecting ADSL loop extender to DSLAM.

L2: The signal twist pair connecting ADSL loop extender to modem.

L3: The power twist pair connecting AEC to ADSL loop extender.  

Resistance and Distance Demand

The recommended installation conditions are as follows:

(1)26 AWG twist pair

The demand about resistance and distance:

(2)24 AWG twist pair

The demand about resistance and distance:

 AEC-B1P-A220

AER800-2P

AER800-4P

AER800-8P