8000LPH Ultrafiltration Natural Mineral or Spring Bottled Water Purification Equipment

8000LPH Ultrafiltration Natural Mineral or Spring Bottled Water Purification Equipment can retain the original minerals and trace elements of the source spring or mineral water when it completely filter out bacteria, rust, colloids and other harmful substances.It is a idea natural mineral/spring water treatment system,most usually use in natural mineral/spring bottled water industry.

 Design of mineral water purification equipment
1.Water source:  Physical and chemical indicators have reached the standard of local water purification
2.The quality of raw water: According to water test report
3.Water quality:  barrels / bottled water purification standards
4.Production capacity:8000L/h (25 °C)

Description of the Whole UF water purification system
Operating system: (24 hours) operation
Water supply: continuous water supply
Mode of operation: the use of interlock control system; Some manual operation

Design: from the entrance to the installation of water purification water purification equipment exports

Configuration of the mineral water treatment system
Water pretreatment system: by mechanical filters, activated carbon filters, security filters;
PP filtration system: consists by hollow ultra filtration device
Supporting systems: the electrical control system.

Water treatment system installed on the basic requirements of the external

1.Supply & Drain system:Supply auxiliary equipment to the water treatment room, water pressure ≥0.2 Mpa, water usage:16M3/ h, there should be room to leakage and drainage gutter.
2.Electronic Supply:water treatment rooms set up within the distribution box, the total power capacity of 3KW;
3.Workshop:water treatment equipment to use an area of about 20 meters long five-meter wide, the room should be set up within the exhaust devices, the other on the implementation of national standards.

Description of the UF Water Purification system                             

(Chemical Dosing machine)
1. Flow chart: Raw water; quartz sand filter;Active carbon Filter ;PP filter;UF treatment system;filling system
2. Description of the Process Equipment:
The system consists of: pretreatment, hollow fiber devices, supporting systems in three parts. Ultra filtration device to the main equipment, other equipment is its supporting services.

Configuration and character of the 8000LPH Ultrafiltration Mineral Water Purification Equipment

Raw water pumps(booster pump):stainless steel centrifugal pump

To make sure the system’s water flow and pressure.Our company offer export brand booster pump like: Rich;Germany Ville;Spanish Espa.China brand booster pump like :The South Pump;Wuxi Joyoung pump Free repair of mechanical seal pump,Efficient,Low noise,Stable and reliable performance.
Liquid level controller control the booster pump’s start and stop.

Performance parameters:
Model: CHL12-30
Material: 304 Stainless Steel
Flow rate: 12m3 / H
Head: 30m
Speed: 2900/min
Origin: Hangzhou
Quantity: 1

Quartz sand filter: The high-quality 304 stainless steel with a valve operating system, pipeline system, containing the manhole, hand hole, the upper and lower water distribution devices, media, pressure.

Quartz sand filter is mainly used to remove suspended matter and sediment, particle impurity. The device and other water treatment equipment, widely used in water purification process. Quartz sand filter filled with refined multilayer multipath quartz sand, anthracite, fiber ball. In room temperature operation, with acid and alkali resistance, oxidation resistance, application range of PH to 2-13.

System provide protection devices and monitoring instruments, and have automatic backwashing function, dirt and other pollutants can quickly swept away,consumpt less water

Under a certain pressure, made the liquid through the medium of contact flocculation, adsorption, retention, removing impurities, thus achieve the purpose of filtering.

Filter design should fully consider the backwashing intensity, unstable system operation causes are mechanical filter recoil design flaws, the recoil is not complete, the upper filter sand agglomerates SDI ( pollution index ) increased, causing membrane fouling. Considering the mechanical filter backwashing after put into use, filter layer surface formed in the late, impurity penetration, considering the poor effect and other factors, so the use of low flow work, in order to improve the filtering effect, reduce the impact of follow-up processing.
Performance parameters:
Model: WTG-750
Forms: pressure automatic operation, manual recoil
Equipment operating flow rate: 16m / h
Flow rate: 12m3 / H
Design pressure: 0.6Mpa
Diameter: Ø750mm
Equipment Height: 2200mm
Material: SUS304
Filter: refined quartz sand
Size :1-2 .5 mm 4.5-2.5mm

Configuration: Five set sperating valve Ø 40, and pipe fittings, etc.
Operation screen bracket (stainless steel)
Out of the water pressure gauge : 1set

Quantity: 1set

Activated carbon filter: The high-quality 304 stainless steel with a valve operating system, pipeline system, containing the manhole, hand hole, the upper and lower water distribution devices, media, pressure.

Activated carbon filter is mainly used to remove organic matter and residual chlorine. Absorber built by water-based activated carbon, activated carbon filtered water into the adsorption device, adsorption device main functions:

1, Adsorption of organic matter in water part of the adsorption rate of 60%:

2, Absorption chlorine, active carbon adsorption removal of chlorine is not a simple role, but its surface as a catalyst, so full of activated carbon adsorption problem does not exist, but the loss of carbon only.

After the quartz sand filter and active carbon filter,the water basically required the water treatment plants imput water standard: SD1 ≤ 4; TDS≤400

Performance parameters:
Model: WTG-750
Forms: pressure automatic operation, manual recoil
Equipment operating flow rate: 16m / h
Flow rate: 12m3 / H
Design pressure: 0.6Mpa
Diameter: Ø750mm
Equipment Height: 2200mm
Material: SUS304
Filter story: 300mm
Filter: refined activated carbon
Size :1-2 .5 mm
4.5-2.5mm
Configuration: Five set sperating valve Ø 40, and pipe fittings, etc.
Operation screen bracket (stainless steel)
Out of the water pressure gauge 1
Quantity: 1

Precision filters:
Provent the particles entering the membrane,scratched the surface of the membrane.In the normal operating condition,the filter can maintained for 3 mouth.The filter structure for fast replace.

Manufacture of high quality PVC material.Filter holder containing a fixed
Performance parameters:  
Model: WTJ750
Forms: external pressure
Flow rate: 12m3 / h
Design pressure: 0.3MPa
Equipment Height: 1000mm
Filter: melt-blown polypropylene 5um
Cartridge number: 10
Quantity: 1

The hollow ultrafiltration devices: the use of hollow membrane system, with 304 stainless steel frame, famous film membrane components using days, Hangzhou, south of drug wash pump is stainless steel produced multi-stage pumps. Electrical automatic control AC contactor controller, comes with a flow meter, pressure gauge, automatic flush valve and so on.
Protection device: the booster pump with water before and after low water and high pressure switch, water does not prevent the system
Enough pressure is too low, and high-pressure pump to stop operation of the system. As a high-pressure pump caused the water pressure is too high, stop the booster pump power, the overpressure protection system operation.
Performance parameters:
Model: UF-1000(8000LPH) hollow ultrafiltration devices
Water production ≥ 8m3 / h (25 °C) water
Recovery rate: ≥ 75 ~ 90%
Operating pressure :0.1-0 .3 Mpa
Form: automatic control, automatic washing
Including equipment:
Hollow membrane
Model: 8040
Pressure :20-30pi
Material: aromatic polyamide composite membrane
Production: national best
Quantity: 4
The instrumentation and electrical control system
Include:
A, The famous electrical components
B, High and Low Voltage
C, Level control switch
D, Flowmeter
E, Pressure gauge
F, Stainless steel electrical control box
Installation Material
A, Wire and cable, stainless steel stent
B, Ø40 Sanitary pipes
C, Sanitary valves

Assistant Device
Ozone generator system
(SOZ-YB-25G* 1 unit, 20QY-1 pump * 1 units, mixing device * 1 unit)

Installation & Guarantee:
Technical service

Installation and adjustment

1. According to requirement of water, electricity, air and steam consumption and the demands of quality level and pipeline, the User should connect the wire, cable and pipe of water, air and steam to the special position ordered in the installation area of production line ahead of time. Other relevant matching equipment and project should be finished before we adjust our equipment.

2. We’ll bring a suit of portable installation and adjustment tools ourselves during the period of installing and adjusting, the other instruments we need should be furnished by the customer for free including oxygen, acetylene angry, argon, etc. needed in the installation and adjustment site.

The customer should dispatch the capable person to accept training in the installing site.

Quality assurance

1. We guarantee the goods offered are brand-new, not used, with latest design and suitable material made, and we guarantee the specification of the equipments is consonance with the contract.

2. We are responsible for the fault and damage of the production line caused by our design, technology, manufacture, installation, adjustment and material defect etc that all belong to our responsibility.

3. The warranty period is 12 months after acceptance check of the production line. If there is any different between the furnished equipments in the customer’s factory and the equipments concerned in the contract, the users have the right to pass the inspection book to the legal department to claim for compensation to our company within goods warranty period