Anti Static Cleaning Brush Antistatic Anti-static Electrostatic Cleaning Brush for Printing Use Supplier's Choice

During printing process, the most important factor to effect on the quality of the products is static electricity. Strong static electricity even causes sparking, fire. In the plastics and paper industries, carbon fiber antistatic brush is the first choice to eliminate static electricity. The carbon fiber brush is widely used, because it is easy to be installed, low cost and best effect to remove static. Coupled with its excellent electrical conductivity and stable physical and chemical properties, it’s more suitable to remove static in plastics and paper industries static elimination applications.

Widely used in: middle/high speed printing machine, packing machine, packaging machine, bag making machine, slitting machine, cutting machine etc.

1.   The ink spot, ink beard phenomenon: shallow screen printing arises ink spot, on-site printing arises ink beard.

2.   Knife line: static will lead to largen the ink particles, which produce knife line.

3.   The lack of printing: static adsorbs dust causes the lack of printing.

4.   Rolling up surface is irregular: same static charges repel each other, cause interlayer film sliding due to static electricity.

5.   Rolling up static is large; it is the main position to outbreak of fire.

6.   Electric shock the operator, affect the normal operation.

7.   The products adsorb and adhere, open mouth is not good.

8.   Static will lead to damaging the electronic devices.

Static brush/belt have a very good eliminate static property, and they have become a main method to eliminate static in packaging and printing industries (plastics, paper), with the following characteristics:

1.  Electrical conductivity: superconducting electrostatic brush resistance is R≤2Ω, superconducting electrostatic belt resistance is R≤2Ω/meter, their electrical conductivity is higher 30 and 100 times than carbon fiber, and have good characteristics of approximate conductor.

2.  Softness: the same softness as cloth, will not scratch the contact materials. When electrostatic belt is installed in the rolling up position, changes over diameter, can timely and effectively eliminate static.

3.  Corrosion resistance: brush has acid and alkali resistance, oxidation resistance, high temperature resistant, low temperature resistance and other advantages, long-term immersion in solvent such as toluene, butanone without changing the properties. Its performance is stable, especially suitable for long-term use of plastic and paper industry.

4.  Fireproof: not afraid of fire, even after fire the performance will not change.

5.  Easy to use: superconducting electric static brush installs on the aluminum alloy frame to use; superconducting electric static belt is mainly used in winding station, direct lift and install above the winding station. Reliable method is to eliminate static. According to the need to customize the length and easy installation. No power, no shock hazard, not produce harmful rays, not pollute the environment.

6.  Suitable for printing, photocopying, electroplating, composite, coating and other industries.

 1. It can eliminate static electricity, prove the printing, peritoneum and bag making effect, avoid the hidden danger of fire.

2. It suitable for all kinds of packaging machine such as high speed printing machine, slitting machine, bag making machine and peritoneum machine.

1. Electrical conductivity: 1-meter-long antistatic brush, the resistance R ≤ 1Ω, 30-100 higher times than the carbon fiber antistatic brush.
2. Pliability: Like soft cloth, will not scratch the material, and can effectively eliminate the static electricity promptly.
3. Anti-corrosive and abrasion resistant: Immerged in solvent, such as Toluene, Butanone, the characters will not change. It’s especially suitable for plastics and paper industries, film production and printing producing line.
4. Flame resistance: it can resist the fire, when burns it, the characters will not been changed. When there is dust on the electrode acme, you can burn it to get rid of it, and then you can use antistatic brush continuously.

 *We have  more than 10 years of stroboscope manufacture expeirence!

 *We own research and development team, we can offer you the best and the newest products in      time.

 *We own after-service team, we can help you to solve any problem in time.

 *All our stage series lights have one year wanrranty and CE&RoHS certification

 Welcome to place the trial order,please feel free to contact Cherry as following: 

 Website:  

 Whatsapp:0086-18271937408

 We reply your inquiry within 6 hours, 100% satisfied your service;

 We accept OEM/ODM, 100% we are your loyal and proper factory.