Blood Dialysis Machine

Specifications

Hemodialysis Machine AJ-M2028B

(Single Pump LCD Touch Screen)

Standard Configuration Description

1. Hemodialysis treatment (HD)

2. ISO UF(sequential)

3. Hemoperfusion (HP)

4. Plasma exchange (PE)

5. LCD touch screen panel(10.4”)

6. UF & Sodium profiling with graph.

7. Single Pump

8. Acetate & Bicarbonate Dialysis.

9. HCO3 Function - Bicarbonate Profiling & trend Graph.

10. Volumetric Ultrafiltration.

11. Heparin pump with 10, 20, 30 ml syringe. Flux: 0.1ml to 10ml/hr

12. Single & Double Needle Dialysis.

13. Built in battery Back-up 30 Min.

14. Switzerland made Magnetism Valves

15. New designed inner structure with more convenient maintenance.

Specifications

* Volume (length*width*height): 370mm*340mm*1570mm

* Weight: About 90kg  

* Power supply voltage: AC220V±10%  

   Frequency: 50HZ ~ 60 HZ

   Power: 1500W

*Blood pump/spare pump: Flux: 15 ~ 340ml/min ( 6mm)

20 ~ 460 ml/min ( 8mm)

* Heparin pump:

   Flux: 0.1ml/h~10ml/h(±5%)  

   Precise: 0.1ml/h

   Injector size: 20ml/30ml/50ml ,10ml/20ml/30ml (selectable)

* Arterial pressure:

   Display scope:-300mmHg~+300mmHg (±10mmHg)

*Venous pressure:

   Display scope:-50mmHg~+300mmHg (±10mmHg)

* Dialysate flow:

   300ml/min~800ml/min linearity adjustable (+10%) (-5%)

   Temperature:35.0°C~39.0°C

   Resolving rate:0.1°C

   Conductivity:13mS/cm~15.5mS/cm (±0.1 mS/cm)

* UF flow scope: 0~1800ml/h(±30ml/h )

                 0~4000ml/h(optional)

*ISO UF flow scope:0~2000ml/h(±30ml/h)

* TMP

   Scope:-100mmHg~+600mmHg (±20mmHg)

* Blood leakage monitor: Over 1ml blood per liter dialysate (flow: 500ml/min)

* Blood level monitor: Ultrasonic sensor

*Air bubble monitor:

   Infrared and response threshold value:

   Single air bubble of 200  exists when

   Blood flux is 200ml/min

* Inflow pressure:0MPa~0.6MPa

*Inflow temperature: 5°C~30°C

* Environment temperature: 10°C~30°C,

   Relative humidity≤70%

* Rinse/disinfection: chemical disinfection

   (citric acid, peracetic acid and oxalic acid)

* Hot rinse: 80°C

* Back-up power supply: last for 15-30min after electric-cut.