fertilizer roller extrusion pelleting machine

  Introduction of pellet making machine:

1. Pellet Making Machine adopts the couple roller. Between the rollers, there is certain gap.

2. Using double output shaft reduction Machine, makes the couple roller in phase and run face to face.

3. One group of roller axle seat is fixed and another group of roller axle seat is slipped.

4. With the support of the pressure of hydraulic cylinder, they are close to each other and the hydraulic system can has the action of compensation and protection.

5. In the surface of the roller, the hole (arc trough) of many shapes and same size are arrayed.

6. According to the different compression rate of the materials, choose the trough of one roller aiming at the trough of another roller, or peak to trough.

7. Two rollers is arranged in horizon.

8. The powder material on itself weight is compulsorily feed into the gap between two rollers over the rollers continuously and equally.

9. When the material enters into the gripping area, it is gripped by the roller.

10. With the continuous turning or the roller, the occupied space of the material is less and less and gradually compressed and reaches the max value of the formation pressure.

11. Then, the pressure gradually reduces.

12. The flakes due to its elasticity and self weight breaks off the arc trough, and enter into the cutting and pelletizing device and sieves into the pellets.

Parameter of fertilizer roller extrusion pelleting machine:

Note: This specification is just reference, any changes are subject to the products.We can produce equipment as your special requirement, Welcome to customization! 

Pictures of fertilizer roller extrusion pelleting machine:




Roller of fertilizer roller extrusion pelleting machine:

Delivery:

We have developed long and good relationship with many shipping agents. Ocean freight partners are: APL COSCO OOCL CSCL MSC .etc. and train shipping is also available. the perfect shipping way and best service with lowest price are always provided for customers.

Mining machines design and manufacture.
Technical engineer is available to the construction site for installation instruction and trial operation. 
Customization is available. 

Why Choose Us?

We are the manufactory, we can provide you ex-factory price;

Strictly quality control system;

Professional technical online service;

Any mail or message will be replied within 8 hours;

Completive manufactory price;

We have many large ore dressing line;

We will provide equipment operation training for our client;

We have a professional after-sale service team to promptly solve your problems.