Huawei AP7130DN-AC Wireless Access Point in Wall Access Point

  Huawei AP7130DN-AC outdoor Access Point  wireless access point

The AP7030DN-AC is a premium series dual-band Access Point (AP). Support for IEEE 802.11ac enables the AP7130DN-AC to support GE bandwidth, which greatly improves user experience. The AP7030DN-AC is applicable to scenarios with a simple building structure, a small size, a high density of users, and high capacity demands, such as small-sized conference rooms, bars, and entertainment areas.

The AP7030DN-AC is recommended for use in buildings with a simple structure, small area, a high density of users, and requires a high capacity, for example, small-scale meeting rooms, bars, and entertainment places. The AP7030DN-AC APs can be flexibly deployed in these places and work in both Fit AP and bridge mode.

Specifications

Antenna Parameters

WLAN Features

• Compliance with IEEE 802.11a/b/g/n/ac, providing a maximum rate of 1.3 Gbit/s for each radio
• Maximum ratio combining (MRC)
• Maximum-likelihood detection (MLD)
• Aggregate data units, including A-MPDU (Tx/Rx) and A-MSDU (Rx only)
• 802.11 dynamic frequency selection (DFS)
• Short GI in 20 MHz, 40MHz and 80MHz modes
• 256QAM modulation
• Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding
• Automatic and manual rate adjustment (the rate is adjusted automatically by default)
• WLAN channel management and channel rate adjustment
• Supports the FrameBurst function that can improve the peak throughput
• Automatic channel scanning (the AP7030DN-AC scans channels used by other APs, measures their interference, and reports the scanning result to the AC to trigger channel adjustment)
• Service set identifier (SSID) hiding
• Signal sustain technology (SST)
• Unscheduled automatic power save delivery (U-APSD)
• Control and Provisioning of Wireless Access Points (CAPWAP)
• Automatic AC discovery

Network Features

• Compliance with IEEE 802.3u
• Auto-negotiation of the rate and duplex mode and automatic switching between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X) mode
• VLAN assignment based on SSIDs
• VLAN aggregation on uplink Ethernet ports
• 4093 VLAN IDs (1-4093) and 16 virtual APs (VAPs)
• Uplink ports in tagged and untagged mode
• DHCP client
• PPPoE dialup
• Centralized data forwarding and local data forwarding
• STA isolation in the same VLAN
• ACL
• LLDP
• Uninterrupted service forwarding upon CAPWAP channel disconnection in direct forwarding mode
• Uniform authentication on an AC
• Dual-AC backup