uv led/uv led for drying & curing

Specifications

UV LED area light source curing system

Unlike traditional UV lamps, which limits on heat sensitive materials and an external fan system is needed. This area light source offers industrial strength curing with a large illumination area for high process throughput, while ensuring uniform intensity from the center to the edge and enables printing on almost all kinds of substrates even on thin film, thin plastics, foam plastic (ceiling tile), paper, and leather.

Unique Features and Benefits:

• Extra-long guaranteed life: 20000+ hours , provides lower cost of ownership
• Instant on/off
• Narrow UV output spectrum
• High intensity, emits no heat- able to cure heat sensitive materials
• Maximum UV intensity up to 4000mW/ cm2
• Eco-friendly, mercury and ozone free
• Compact - Easily embedded into automated manufacturing lines and equipment
• No serious safety concerns associated with conventional UV curing lamps
• Five working modes: constant current, PWM, step, intelligent optical and manual modes, which are specially designed for eliminating cementing stress of UV adhesives
• Many kinds of circuit technique design (patented). The whole system will not be affected by the damage of one LED module.
• Uniformly arrayed LED and optimal designed lens groups guarantees uniform and stable irradiation, the intensity change from the center to the edge is no more than 3%.

UV LED area light source illumination

Unique Features and Benefits:

Two wavelengths of LED available: 365nm, UVA385-400nm

UV intensity: 50mW/cm2, 100mW/cm2, 200mW/cm2 (365nm)
                     800mW/cm2, 4000mW/cm2 (385-400nm)

Emitting window: Available in configurable UV emitting L×W from 20-2000mm×20-2000mm

Cool method: air cooled( a mini fan installed) or water cooled