High quality 12v motion sensor switch

  High quality 12v motion sensor switch

  High quality 12v motion sensor switch

High quality 12v motion sensor switch

 4, Installation:

4.1 Position for installation.

When you are selecting the mounting position take into account the following points.
1. The sensor is designed for optimum performance when mounted 2.5 meters above ground level.
2. Avoid positioning close to trees or shrubs, which may cause false triggering during wet windy weather.
3. Avoid pointing at or positioning close to heat sources such as flues or heat extraction units, which may cause false triggering.
4. Avoid pointing at bright lights as unit will not function when you set LUX control level to dark.
5. Avoid mounting at strong electromagnetic disturbance, which may cause false triggering.
6. The sensor is most sensitive to movement across the detection area as opposed to directly towards or away from the unit. Position the unit to point across flow areas.

4.2 Steps for installation:

1, Shut off power.

2, Loosen the screw on the bottom lid, open the wiring hole, pass the wire of power and load through the bottom lid.

3, Fix the bottom lid with inflated screw on the selected position.

4, Connect the power and load wire into connection-wire column according to the connecting figure.

5, Put the sensor on the bottom lid, twist the screw tightly then electrify it and test it. 

High quality 12v motion sensor switch

High quality 12v motion sensor switch

NOTE:

1. Should be installed by electrician or experienced person.

2. Avoid installing it on the unrest object.

3. There should be no hindrance and moving objects in front of the detection windows to effect detection.

4. Avoid installing it near air temperature alteration zones such as air condition, central heating, etc.

5. Considering your safety, please do not open the cover when you find the hitch after installation.

6. If there is difference between instruction and the function the product has, please give priority to product and sorry not to inform you additionally.

 High quality 12v motion sensor switch

SOME PROBLEM AND SOLVED WAY

1. The load do not work:

a. Please check if the connection-wiring of power and load is correct.

b. Please check if the load is good.

c. Please check if the working light sets correspond to ambient light.

2. The sensitivity is poor:

a. Please check if there has hindered in front of the detection window to effect to receive the signal.

b. Please check if the ambient temperature is too high.

c. Please check if the induction signal source is in the detection fields.

d. Please check if the installation height corresponds to the height showed in the instruction.

e. Please check if the moving orientation is correct.

3.The sensor can not shut off the load automatically:

a. Please check if there is continual signal in the detection field.

b. Please check if the time delay is the longest.

c. Please check if the power corresponds to the instruction.

d. Please check if the temperature near the sensor changes obviously, such as air condition or central heating etc.