Haijian standard coal vertical mill

Specifications

HJ Vertical mill is one kind of roller mill. As requested, it may equip with 3 or 4 rollers. Each roller is composed of fixed roller, support of installation rocker arm and hydraulic system. Motive force unit is in the whole or a standard part. It can be arranged in two components, three components or four components around mill discWork Principle

Raw material feed into discharge pipe through rotary discharger. Discharge pipe enter into the mill through the side or the center of the separator. Material will fall into the center of mill disc with the help of gravity and air flow. Mill disc connect with the reducer constantly. Constant speed rotation of mill disc will distribute material evenly in the lining plate of mill disc. There inclined mill roller will bite material and pulverize. Grind material with the function of pressure and friction.

Centrifugal force will make pulverized material at the edge of mill disc from the middle of mill disc. Material off mill disc will enter into hot gas in the mill through air ring. Via the middle of the mill shell and enter into the Sepratator.During the process, material will exchange hot gas.The moisture will be evaporated.The rest moisture can reach 1%. Unpulverized material as request will be selected by the Separator and send back mill disc.

Standard parameter of HJMS slag vertical mill

technical parameter of HJCM standard coal vertical mill (Anthracite vertical mill will be discussed in another)

Remarks: Elevation standard of mill capacity

(1) Easy grindability of raw material HGI= 55~60 ;

(2) The moisture of raw material is 10%;

(3) Grain of fine powder :80mmR3%

(4) Moisture of fine powder: 0.5~1.0 %