Sealed Lead Acid Storage GEL Battery 12V55AH

Specifications

1) SPECIFICATIONS:

2. FEATURES:

1) Good start-up capability:
It can output the high electric power instantly which brings the motorcycle superior starting effect. Motorcycle can start up in one touch.
2) Starting performance on the condition of low temperature:
Unique alive materials species makes well starting-up on of motorcycle under condition of low temperature.
3) Lower resistance:
Infinitesimal resistance interior material assures sufficient power output.
4) Lower self-discharging rate:
Introduction of special fitted lead powder and lead-calcium alloy plate effectively lockup electricity power supply.
5) Security:
Special configuration and equipment with good anti acid-mist and anti-explosion.
6) Long service life:
Super anti-erosion material guarantees battery long service life.

3. APPLICATIONS AND MAINTENANCE:

1) It’s Sealed Valve Regulated with none requirement to add extra water or maintenance when using
2) Excellent High-Rate Discharge Performance: Being propitious to start with high current
3) Recharging: when open circuit voltage is lower than 12.6V(12V series) or 6.3V(6V series) before using

Recharging Method: Charging 4-10 hours by 0.1C10 constant current
4) Charging Voltage, when normal using, is 12.8V-14.5V(12V series) or 6.9-7.2V and Max Charging Current 0.4-0.5C10(A)
5) Application Temperature: -20-60°C

6) Not upside down when transporting, storing and using

7) Recharging: Offloading the battery to recharge when Motorcycle could not start well, poor lamp lighting and weak trumpet

8) Timely Recharging if long time no use. Normally, it’s 1-2months.

Storage place should be prevented from humidity, high temperature and avoid to keep in the place of corrosive gas and solvent.