Strong abrasion resistant Bombas Double Casing Slurry Pump

Specifications

Strong abrasion resistant Bombas Double Casing Slurry Pump  

HS Slurry Pump is a single stage, single-suction centrifugal pump that is designed to transfort the strong abrasive, corrosive,  high concentration slurries in Power, Mining, Metallurgical, Coal, Petrochemical, Building Material, and other industrial applications. 

Features:

• HS slurry pumps can be used by series connection for special application request 
• The discharge outlet can be adjusted at 8 directions with intervals of 45 degree
• Slurry pump's bearing assembly use cylindrical structure, adjusting the space between impeller and front liner easily. They can be removed completely when being repaired. Bearing assembly use grease lubrication
• High chromium alloy wet parts can stand stong abrosive
• Shaft seal is packing seal with expeller seal, that has excellent sealing performance
• A variety of drive modes( CL,CV,CR,ZL,ZV,ZR) can meet hard operation circumstances 

Constructure of HS Slurry pump 

1) Constructure of HS20-450 Metal Liner Slurry Pump:

2) Constructure of HS20-450 Rubber Liner Slurry Pump:

	No.	Description	Material Code	ASTM Code
	1	Pump cover	QT500-7	70-50-05
	2	Cover plate	Rubber+Q235	Native Rubber+A570GR.C
	3	Impeller	Rubber+QT500-7	Native Rubber+70-50-05
	4	Cover Plate Liner	Rubber+Q235	Native Rubber+A570GR.C
	5	Pump casing	QT500-7	70-50-05
	6	Frame plate Liner	Rubber+Q235	Native Rubber+A570GR.C
	7	Stuffing box	Rubber+HT200	Native Rubber+No.30A
	8	Waterproof cover	1Cr18Ni9Ti	321

The impeller may be either moulded elastomer or hard metal. Deep side sealing vanes

relieve seal pressure and minimize recirculation. Cast-in impeller threads are better suited for slurries. 

Mating faces in hard metal liners are tapered to allow positive align-ment during assembly and allow  

components to be easily removed for replacement.

Transmission Module

Large diameter of pump shaft, eylindrical construction of heavy load, metric bearing using oil lubrication or grease lubrication; operated in serial, the construction features of small volume and high reliability.

Shaft Seal Module Design

1) Expeller Seal 

2. Packing Seal

	No.	Description	Material Code	ASTM Code
	1	Packing box	KB04	25% Cr
	2	Lantern ring	KB04	25% Cr
	3	Packing	PTFE	PTFE
	4	Packing gland	HT200	321
	5	Shaft sleeve	KS81	420

3. Mechanical Seal

                      GRJ Mechanical Seal                                                          HRJ Mechanical Seal 

4 Helix L Rubber Sealing

Outline and Installation Dimension