NK-15XZ Image Intensifier for X-ray System

Specifications

Newheek NK-15XZ X-Ray Image Intensifier

I. Brief Introduction:

It is the electronic output equipment which converts the x-ray image into the visible light image. It is installed on the x-ray TV system, which is applicable to the x-ray fluoroscopy and radiograph.

II. Construction:

It is composed of x-ray image multiplier tube, tube container, HV power supply (which is set inside of tube container) and low voltage power supply (which drives the high voltage power supply).

III. Application:

The nominal entrance field of view is 150mm (6inch), which is mainly application to lithotrity and industrial detection X-ray machines.

IV. Main Technological Parameters:

1. Photoelectric Performance:

(1) Input screen size: 150mm

Effective entrance field of view size: 150mm

Output image diameter: 15mm

Limiting resolution: 48Lp/cm

(2) Low Voltage Power Supply Performance Parameters:

(3) Input voltage: 86V~265V

(4) Input power supply frequency: 50Hz/60Hz

(5) Output voltage: 24V±0.5V

(6) Output current (effective value): 1.5A

V. Standard Configuration:

(1) 24V power supply box: 1 piece

(2) 24V power supply cable: 2 pieces

(3) Ground wire: 1 piece

(4) Image intensifier: 1 piece

(5) Service manual: 1 copy

(6) Quality Certificate: 1 copy