Rod End Bearing PHS5 PHS8 Rod End Ball Joint Bearing PHS10 PHS12 Spherical Plain Bearing

1.Specifications:

 2.Features of Rod End Bearing Rod End Joint Bearing :

A.High quality material.
The Aurora Bearing product line features over twenty different series of rod ends bearing in inch, or imperial, dimensions. Products range in bore size from 1/8 to 2 inch, with threads from 6-32 through 2"-12. All feature one-piece, full swage steel raceway construction, with the exception of the SPM/SPW series, which feature a proprietary low friction high wear resistance molded liner.

Sifan rod end bearing and spherical plain bearings are intended for linkage applications where a bearing must accommodate significant misalignment. While spherical plain bearings offer flexibility in housing and mounting design, rod ends offer greater mounting convenience and provide a compact, lightweight, economical design alternative to the spherical plain bearing .
B.No need to fill in lubricative grease during installation.
An appropriate amount of lubricative grease has been filled into the bearing. The bearing is waterproof and it has a thermal resistance of 150 °C.
C.High operation efficiency.
Simple structure and simplified the installation. wheel bearings, front wheel bearings
D.The bearing has a compact design and high rigidity.
No need to use with any partition and minimize the space that axial occupied, so using with a high rigidity short axial is a good idea.
E.High load carrying capacity.
The bearing can burden axial and radial load coming from both direction at the same time.

F.High impact resistant. 
The design of the bearing has a big contact angle, a large distance between two center of pressure coefficient , as a result, it can accommodate the impact force produced by vehicle turning and other motion activities. 
G.High sealing performance. 
Since the bearing sealed by using contact form, so it would not affected by the dust and prevent grease leakage. 
H.Reliable and long service life 
1,We produce bearing's ring by using rolling and forming technique in order to increase the service life. 
2,The design of the bearings is a non-separable type, it creates less friction and vibrating noise. 
3,The bearing is easy to install, small size, lightweight and high load carrying capacity. wheel bearings, front wheel bearings

 3.Rod End Bearing PHS5 PHS6 Rod End Ball Joint Bearing PHS10 PHS12 Catalogue: 

PHS series Rod end ball joint bearing

SOLUTION

– At the beginning, we will have a communication with our customers on their demand, then our  engineers will work out an optimum solution based on the customers’ demand and condition.
PRODUCTION

– Running in accordance with ISO 9001 quality system, the advanced production equipments,  sophisticated processing technology, strict quality management system, skilled workers and innovative technical team, make our bearings in continuous quality improvement & technology development.
QUALITY CONTROL (Q/C)

- In accordance with ISO standards, we have professional Q/C staff, precision testing instruments and internal inspection system, the quality control is implemented in every process from material receiving to products packaging to ensure our bearings quality.
PACKAGE

– Standardized export packing and environment-protected packing material are used for our bearings, the custom boxes, labels, barcodes etc. can also be provided according to our customer’s request.
LOGISTIC

 – Normally, our bearings will be sent to the customers by ocean transportation due to its heavy weight, airfreight, express is also available if our customers need.
WARRANTY

– We warrant our bearings to be free from defects in material and workmanship for a 12 months period from the shipping date, this warranty is voided by non-recommended use, improper installation or physical damage.

High Quality Bearings, Choose Saifan.
Jinan Saifan Bearing Co., Ltd is a professional bearing manufacture located in Jinan, Shandong.

We are established in year 2005 and we have 10 years experience in bearing manufacture.
We mainly produce wheel hub bearings, ball bearings, roller bearings etc.

 

Q:What’s your after-sales service and warranty?

A: We promise to bear the following responsibility when defective product is found:

1.12 months warranty from the first day of receiving goods;

2. Replacements would be sent with goods of your next order;

3. Refund for defective products if customers require.

Q:Do you accept ODM&OEM orders?

A: Yes, we provide ODM&OEM services to worldwide customers, we are able to customize housings in different styles, and sizes in different brands, we also customize circuit board & packaging box as per your requirements.

Q:What’s the MOQ?

A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.

Q:How long is the lead time?

A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.

Q:Do you offer free samples? 

A: Yes we offer free samples to distributors and wholesalers, however customers should bear freight.

 We DO NOT offer free samples to end users. 

Q:How to place orders?

A: 1. Email us the model, brand and quantity, consignee information, shipping way and payment terms; 

2. Proforma Invoice made and sent to you; 

3. Complete Payment after confirming the PI; 

4. Confirm Payment and arrange production.