Gas or Oil Motivated Incinerator Machine

gas or oil motivated incinerator machine

  Descriptions of incinerator machine:

 This medical waste Incinerator is a kind of machine that was developed on the basis of Japanese technology. It absorbs advantages of similar equipment both at home and abroad. It features unique and advanced merits with compact size, high burning effect, reasonable burning technology, high degree of non-harm etc. It is an ideal choice for waste treatment of hospitals, hotels and various areas.

  The product is mainly suitable for solid medical waste (including pollution), waste plastic and rubber etc,at high temperatures they can be divided into organic compounds.we can offer all kinds of waste incinerator for industrial waste, medical waste, chemical waste and daily waste at any capacity.

Technical Specification

features of incinerator machine:

1.Gasified pyrolysis incineration is used for burning many kinds of wastes.

2.Both gas-motivated and oil-motivated modes all can be preferred according to customers’ needs.

3.Daily waste can be burned once by gasified incineration.

4.Gasified incineration, mixed incineration and burnout treatment ensures low emission standard of dust, dioxin etc. (lower than International standard).

5.Totally enclosed operation is suitable for treating infectious waste to avoid secondary pollution.

6.It has compact structure, small land occupation, long lifetime, simple operation and totally enclosed operation. It is suitable for treating many kinds of solid wastes. It can also avoid secondary pollution.

 The advantage of incinerator machine:

1) Long lifetime

2) Totally enclosed operation

3) Suitable for treating infectious waste

4) Avoid secondary pollution

5) Simple operation

Technological process:

1.This medical garbage incinerator is provided with the currently most advanced incineration way, i.e., primary pyrolysis gasification, co-firing of surrounding wind, secondary incineration, burnout treatment.

2.The primary incineration chamber of this incinerator is provided with the gasification incineration technique, which makes the temperature inside the incinerator rise from 200℃ to 400℃. The problems such as clinker, residue and sintering will never happen in the process of garbage incineration.

3.The secondary incinerator and toroidal air supply device are set inside the secondary mixed incineration chamber. The combustible gas in the smoke will be burnt fully under high temperature, which can burn the gas generated by the gasifier and air fully and effectively by mixing them and prevent the overflow of the carbon substances in gas and late incineration. The smoke enters the high-temperature incineration chamber tangentially and the combustion-supporting air also enters it in a tangential manner, making the smoke incinerate fully again in the incineration chamber.

4.The flue gas dust removal is made by the swirling air flow. The retention time of incineration smoke in the incinerator is greater than 2s, so that the combustible gas in smoke and the combustibles in the flying ash burn fully. Dry tail gas purification device is set in the upper part of the incinerator so as to absorb the chlorine hydride and oxysulfide generated by incineration. The odor in smoke will be decomposed under the high temperature.

5.The smoke purification system is provided with calcium hydride filter brick which will be involved in neutralization reaction with the acid gas in order to absorb the acid gas and purify the tail gas. The harmful components of the smoke are decomposed below the value specified in the national standard “Pollution Control Standard for Hazardous Wastes Incineration (GB18484-2001)”.