DMX RGB LED Controller

DMX RGB LED Controller Technical Parameters:

Working temperature: -20-60 °C
Supply voltage: 5V~24VDC
Output: 3 channels
External dimension: L165ΧW68ΧH40(mm)
Packing size: L180ΧW95ΧH60(mm)
Net weight: 320g
Gross weight: 355g
Static power consumption: <1W
Output current: each channel 4A
Output power: 5V:<60W, 12V:<144W, 24V:<288W

DMX RGB LED Controller Direction for use 

DMX address code settings
Each DMX common controller occupied 3 DMX addresses, adopt coding switch set address, it is a Binary
numerical code switch which is setting DMX original address code from 1 to 9, 1 is the lowest, and 9 is the
highest,511 address codes could be set in all. DMX original address code equal aggregate value of the coding
switch value from 1 to 9,dial the coding switch upwards(ON is set 1),the value of bit can be gotten, on the
contrary, the value of bit is 0.
DMX signal can be received when coding switch FUN(10)=OFF(ON is set 0).
1. example 1:
Look at the following picture, if you want to set 37 as the address code, you can only dial down the first, the
third and the sixth code switch, the aggregate value of coding switch value from 1 to 9 is 32+4+1,that is, the
original address code of DMX512 is 37.
Picture 1
2. example 1:
Look at the following picture, if you want to set 328 as the address code, you can only dial down the ninth, the
seventh and the fourth code switch, the aggregate value of coding switch value from 1 to 9 is 256+64+8,that is,
the original address code of DMX512 is 328.

Other functions direction for use
1. Testing function:
The tenth bit of coding switch is “FUN”, that is a built-in function button. FUN=OFF shows the DMX decoder
function, DMX signal can be received.
The default coding switch1-9 is off: black
Switch1=ON:red
Switch2=ON:green
Switch3=ON:blue
Switch4=ON:yellow
Switch5=ON:purple
Switch6=ON:cyan
Switch7=ON:white
Switch8=ON:seven-color jumpy changing(8 steps speed)
Switch9=ON:seven-color gradual changing(8 steps speed)
2. The speed choice of jumpy changing, gradual changing effect
When test the function, switch 8=ON shows the seven-color jumpy changing effect, switch 9=ON shows the
seven-color gradual changing effect, every effect has 8 steps speed:
Off switch from 1 to 7: 0 steps
Switch1=ON:1 steps
Switch2=ON:2 steps
Switch3=ON:3 steps
Switch4=ON:4 steps
Switch5=ON:5 steps
Switch6=ON:6 steps
Switch7=ON:7 steps(the greatest speed)
There are several switches=ON at the same time, the great value is standard. All dial code
switches= ON as the following picture, the state of the decoder shows: to test the functional
effects of gradual changing, the speed of change is 7.