Quartz Further Processing Tube

Specifications

Quartz Further Processing Tube(large diameter)

Main used in heater,beautiful.

Characteristic:bearing high temperature,no rusty

Output:2,000,000pcs/month

U Sharp Quartz Tube(Small diameter)

Main used in measuring the temeprature of melting metal

Output:10,000,000pcs/month

Bending Tube

Can be done diffierent sharp according to the clemand of the customers.

Usage:Heater,chemical test,lighting

Lamp production for quartz buld

Usage:JC Lamp,JT Lamp

Closing tube:

Closing at one end or two ends for clear quartz tube or milky quartz tube can be done according to the demand of the customers.

Usage:Heater lighting,chemical test

Polishing tube:

Can be done at one end or two ends for trimming cutting quartz tubes according to the demand of the customers.

Usage:Can be done for the requirements of the end of quartz tube

Spiral tube:Can be done according to the demand of customers

Usage:Heater.etc

Processing with edge:

Can be done any angle and camber according to the demand of customers with quartz edge.

Pair hole quartz tube

The surface of this kind of tube is smooth and the tube is colorless.The properites of the tube are;high purity (SiO2>99.99%)

Abrasion resistance(any acid expect HF acid)

Fire resistance(softening point 1700 centigrade)

Low coefficient of themal expansion(5.5×107/centigrade)

The surface can be done with gold plating.

Half Round Quartz Tube

This is clear fused quartz glass tube qvailable as continuous machine drawn and automatic controlled tubing.This glass had the typical characterastics of high purity,

Good spectral transmission,well controlled dimension and lower OH and so on.

I t serves as the first choice of heat resistant material for halogen lamps,mercury lamps,metal halide lamps and other quartz lamps.

This glass can be supplied in the range of 3-300mm outside diameter 0.5-10mm wall thickness and 10-300mm length.Exhaust tubes with good CPK are suitable for high-speed stream line production.And further processing of trim cutting,fire polishing,bengding and piching and etc.Can be done according to the requirement of customers. OH-content can be controlled within 20ppm/15ppm/10ppm/5ppm/2ppm