Galvanized Water Pressure Tank with Copper Coil

Specifications

Solar water heater tank features

1. Inner tank: Enameled steel BTC340R;

2. Outer tank: Galvanized steel;

3. Insulation: Polyurethane 45-55mm;

4. Inlet/Outlet size: 3/4″;

5. Exchange coil is copper Ø16mm* 1.0mm in thickness; 

6. The electric heater, P/T valve, Check valve, Magnesium bar are included in the water tanks;

7. The working pressure of the water tanks is 0.6MPa

Type of tank:
- Pressurized, vertical or horizontal, working pressure up to 0.85 MPa / 8bar.
- Split, separated water tank
- Balcony, Integrated water tank
- Roof stand water tank
- Ground stand water tank

The heat exchanger:
-cooper coil type (also called heat exchanger), one coil or double coils (first choice is for the high latitude places)
-Non-cooper coil type (first choice s for the low latitude places)

Water tank specifications:

• Outer tank casing: imported colored steel/0.55mm thickness
• Inner tank: SUS304-2B stainless steel/2.0mm thickness
• Insulation: polyurethane foam/55mm thickness
• Standard ports: 3/4-inch female BPP thread
• Temperature sensor port: 1 or 2 adjustable
• Sacrificial magnesium anode: 20 x 40mm
• Heating elements ports: female thread, 1.5kW/3kW
• Tank maximum pressure rating: 10bars
• P/T valve: 12bars
• one cooper coil or two copper coil in tank