CMP E1FW cable gland (UK)

CMP type E1FW cable gland

Material: Brass, Brass Nickel Plated & Stainless Steel

Accessories include: Locknut, Earth tag, PVC Shroud and Nylon Washer.

CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing
(Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour
(SWA) cable. This cable gland provides a Flameproof seal on the cable inner bedding and in addition the gas tight
seal has been tested to prove compatibility with Restricted Breathing equipment. The cable gland allows
mechanical cable retention and earth continuity via the cable armour termination. Separate tightening actions for
the inner displacement seal and the armour termination afford maximum control over the pressure applied to the
cable bedding, and also allows the effectiveness of the gas tight seal to be tested. A detachable armour cone and
AnyWay clamping ring arrangement facilitates remote make off and enables the cable to be disconnected from the
equipment. An environmental / load retention seal is provided on the cable outer sheath.
The CMP E1FW Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1,
Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is
observed, e.g. IEC 60079-14.