Cleaning Equipment Battery Charger

Specifications

Specifications:

 Features:

    1.short-circuit protection,charger o/p current automatically when short-circuit.

    2.overload protection:charger o/p current limited automatically when overload.

    3.reverse polarity protection:it will shut down when the wire is connected,charge DC fuse or remove the fault.

    4.3-stage charging mode: CC(constant current), CV(constant voltage) and float stage.

    5. Reliable, elegant,Small size, light,

    6.charging state:two LED display.

    7.all kinds of production has passed the CE certification.

    8.Efficiency: ≥88 %( full capacity)

Operate Condition:

    1.Temperature: -10~45 Degree

    2.Hi-pot: ≥AC1500 (P to S),≥AC1500 (P to FG)

    3.Life Expectancy: 50,000H at 25 Degree

Apply to:

   1. Electrical forklift

   2. Electrical motorcycle  

   3. Electrical tourist-car

ES-C (1200W) Battery Charger   Datasheet:

Package:

There is product name, model, name of manufacturer, safety approval, serial number, User Manual and packing

list in the package box.

Reliability requirements:

MTBF (standard, environmental temperature, load requirement) ≥50K hours; 

testing condition: 25℃,full load, testing proved value. 

 Storage:

Products should be stored in package box when it is not used. And warehouse temperature should be -40~70℃, and relative humidity is 5~95%. In the warehouse, there should not be harmful gas, inflammable, 

explosive products, and corrosive chemical products, and strong mechanical vibration, shock and strong magnetic 

field affection. The package box should be above ground at least 20cm height, and 50cm away from wall, thermal 

source, and vent. Under this requirement, product has 2 years of storage period, and should be rechecked when over 2 years.

Detail show: