Wireless touching rgb controller/ led rgb controller/12-24V Rainbow Touch RGB Controller

Specifications

RGB Rainbow Touch Controller/ RGB Controller

Model: FL-W-R

Working Voltage: 12v---24v

• Technical parameters

• Working temperature: -20 to 60°C
• Supply voltage: 12 and 24V DC (optional) (for orders specify voltage)
• Output: 3 channels
• Connecting mode: common anode
• Transmission/receiving frequency: 433.92MHz
• External dimensions (L x W x H): 86.5 x 55.6 x 22.8mm
• Packing size (L x W x H): 88 x 88 x 156mm
• Net weight: 170g
• Gross weight: 215g
• Output current: <6A (each channel)
• Output power:  <216W

• Presentation mode:
  • Gradual change model
  • Touch on button again under monochrome mode condition, RGB strip will be changed into gradual
  • change mode
  • Increasing color button will speed up the color change, decreasing color button will slowdown
• Hopping mode: under gradual change mode condition
• Touch on button
• RGB strip will be changed into hopping mode
• Increasing color button will speed up the hopping, decreasing color button will slowdown
• Under gradual change or hopping mode, touching on switch will change one to the other
• Close the RGB strip and restart It if you want to enter monochrome mode
• Pay attention: the change of above two presentation mode need 4 seconds
• Input voltage of remote control must be the same as RGB strips
• Match the color of output wiring when connecting
• When the color doesn't match, for example, it displays blue when touch green, or displays
• green
• When touching blue, please check whether the wiring is correct, in this case, exchange each other