Battery For Solar Panel System 12V 180ah

Battery For Solar Panel System 12V 180ah 

Details:

1. Sealed maintenance free 
2. AGM separator, cathode adsorbent technology for efficient gas recombination
of up to 99% and freedom from electrolyte maintenance. 
3. Equalization charges are not required and cycle or standby (or float) use. 
4. Low resistance and energy output is more remarkable. 
5. Fully enclosed (not liquid leakage, no acid gas spill). 
6. Low self-discharge rates 
7. Flame-arresting one-way pressure-relief vent for safety and long life. 
8. Computer-generated grid design optimized for high power density.

 Applications:

1)Fire protection and security uninterruptible power supply 
2)Electronic appliance and other backup power supply 
3)Telephone and telecommunication equipment 
4)Uninterruptible power supply systems for bank 
5)Emergency lighting or small lamp fitting 
6) Electric power system 
7)Security system

Warnings:

1)- Matrix series batteries have acid in the case and are fully charged before
leaving factory. Do not attempt to dismantle the battery, if accidental skin/eye
contact is made with electrolyte, seek medical advice immediately. 
2)- Do not use a new battery with an old one. 
3)- Do not use the battery in sealed container. 
4)- Each battery should have detailed record including the ex-factory date,
installing date and using record. 
5)- Check the connection of wire in a fixed interval (once a year). If there is
any looseness should tighten the wire. 
6)- Wipe the surface of the battery with soft cloth in a fixed interval (once
three months) and always keep the battery clean. 
7)- Avoid using any kind of organic solvents for cleaning the surface of the
battery.  

Specification: