6V 1.2ah Battery for Emergency Lighting

Certifications

 We are ISO9001 verified factories. From material to finished poducts. Every procedure are strictly managed accordance with this quality stardard, to ensure the good quality supply to customers.

Why Choose Us

1.door to door service.

2.low cost raw material with high quality.
3.Independent designer with more than 10 years design experience.
duct with the international market step.
5.our products are exported to Middle East,Europe,Asia,America,south Africa and else.
6.we would like stand with you in same line to open market with long term business.

Application:

1.Telephone switchboards, electric equipments, medical equipments, medical instruments and meters

2.Computers and uninterrupted power source (UPS)

3.Power transmission and transformer station, switch control and accident lighting

4.Fire fighting, safety device and alarm monitoring

5.Aviation, spaceflight and power storage

6.Automatic office system

7.Radio communication system

8.Emergency lighting and car and ship starting system

9.Portable electric appliances and mining system

10.Traffic and navigation signal lamp

Notice:

1.Don’t near the hot source and don’t under the sunshine.

2.Don’t charge in the sealed container.

3.No short circuit. It should be addition charge if you don’t use, and single charge per three months, to avoid irreversible sulfating. The battery should be changed when the battery jar broken or the electrolyte omitted, to avoid acid corrosion.

4.Don’t store in the space of acid gas. You should be careful and regular check when use the battery. To avoid the battery don’t work. You should change the battery if the capacity is not full or has been damage, especially after one year using.

5.Don’t put the battery in the fire, or it will explode. Please use cotton cloth to clean, if the battery is broken down and leak electrolyte. Please wash your skin when touch the electrolyte.

6.Don’t clean the battery by using the organic solution. (e.g. petrol)