Hologram pvc twist wrap film for candy wrapper

PARAMETERS:

Gold Decal Printing Process

Gold/silver decal is mainly used for glass & ceramics, after firing in oven, (low temperature under 200 celcius degree), it has very good adhesion on glass & ceramics. Now our company newly developed UV ink for primer & covercoat, make the printing job more efficiently.

Step1: Screen printingPrimer/Undercoat on water slide decal paper, by 250 mesh count. Printing area is same with image.

Then dry for 4 to 6 hours.Complete drying. Or you can dry by UV dryer if use UV ink.

A.The undercoat is mixed with hardener(mixing proportion is 9:1), can be used within 8 hours after mixing.

B. workshop condition: humidity is 6075%, room temperature is 23 to 26 celcius degree.

Step2: Hot Stamping by hot stamping roller machine(as below picture),On decal paper.Complete drying.

Step3: Screen Print Covercoat/Varnish, by 80250 mesh count, printing area is 0.51mm bigger than undercoat area. Need complete drying, about 4 hours nature drying.

Or you can dry by UV dryer if use UV ink.

Step4: Screen Print Covercoat peel off lacquer 601A by 80 mesh count. Complete drying. Gold decal paper is done and ready for use after this step.

Tips for Plate Making and Printing:

1, Coating emulsion on screen plate for 4 times.

2, Printing squeegee by 70 or 75 degress.

3, If clients do embossing decal sticker, the embossing powder and gold stamping undercoat should be mixed and grinded subject to right proportion.

Packing: carton, packing also can follow your requirement

OUR GUARANTEE & SERVICE:

Guangzhou Lianlong paper Co.,ltd.We are a professional manufacturer&supplier specializing in watermark paper.

If you are interested in our products,pls let's know.Welcome to contact to us.