electric atomatic raise flag pole

Electric flagpole

   1.Type: Atomatic raise Flag pole.Electric-system has a remote control to hoist the flag,also with manual winch in case there no electicity supplied to the electric system.

   2.Material:  aluminium/stainless steel

   3.Height: 12-100m.Other sizes can be customized.

   4.Thickness: 2.5mm-5.0mm.This  depends on the height of the flag pole.

   5.Top Diameter :80mm . Bottom Diameter:depends on different height.Can be customized.

   6.surface:hairline,polish, oxidatiion.

   7.Halyard System: Internal halyard system .

   8.General Production Process:Shearing the stainless steel sheet and bending to forming.Then welding.Finally, polishing for the surface.

   9.Accessories: stainless steel halyard, 360 degree downwind ball, hanging pole for hanging flags,                      embedded parts for installation, Direction bead for holding flags, manual handling device with handle or            electronic device if necessary.

10. Application:national flag,school,hotels,exhibitions,sprots center,etc.

 11.OEM&ODM is welcome.

   a.use plastic bag as first layer first layer of packing,
   b.use bubble sheet as second layer of packing.Stainless steel Internal flagpole halyard/Internal halyard flagpo
   c.use PE sheet as third layer as third layer of packing.
   d.use carton for accessories.

  2.Delivery: For the height less than 12M, it can be loaded into container directly.While for the huge sizes ,it can be shipped in sections and together with the self-aligning sleeve which requires Argon Arc welding.

Office

Show Room

Welcome to contact us