We are looking to purchase a 4 Hi Reversible Cold Rolling Mill with AGC system. Required specifications include 750 mm width, detailed technical information on gear box, DC motors, backup roller diameter, work roller diameter, and support roller bearing sizes. Please provide the best price and comprehensive technical details.

We are seeking formal quotations for industrial motors with the following specifications:

1. Electric Motor 40 HP 380V/3PH/50HZ 1800 RPM - 1 unit
2. Electric Motor 60 HP 380V/3PH/50HZ 1800 RPM - 1 unit
3. Gear Motor 2HP 20RPM 380V/3PH/50HZ - 1 unit
4. Gear Motor 3/4HP 20RPM 380V/3PH/50HZ - 2 units

Please include detailed pricing, availability status, production/delivery timeline, and warranty terms in your offer. Suppliers must specify compliance with stated voltage and phase requirements.

We are looking to purchase DC motors for industrial applications. Please contact us with product specifications and pricing details. Kindly provide information regarding available power ratings and certifications.

Seeking urgent replacement for broken electric motor in actuator system. Required specifications: MD 4130 model, 29V DC 2A rating with worm gear compatibility.  

The motor shaft failed at the worm gear connection in our existing equipment. Need to source 1 unit for immediate repair.  

Prefer local suppliers in Belgium for faster delivery. Budget considerations based on actuator's total value (€240 unit price).  

Require motor that matches exact technical parameters to ensure proper integration with current actuator mechanism.

I need to procure reducers that can be matched with my existing equipment. Please check the motor and gear unit photographs I will send via email. The supplier should analyze the photos to propose compatible reducer models. Specifications like power rating and speed parameters need to be discussed based on the visual documentation. Looking for manufacturers who can provide technical consultation based on visual equipment assessment.

We require mechanical components for a 3-vessel brewhouse installation in India. Key requirements include:  
1. Bottom-entry mash-kettle agitator with modified paddle (?1500mm, 48rpm, 5.5kW)  
2. Bottom-entry adjunct-kettle agitator (?1200mm, 65rpm, 3.7kW)  
3. Lauter-tun raking arm system with 350mm vertical stroke (3.7kW geared motor + 1.1kW linear drive)  

All components must comply with Indian standards (IS, IEC, IPSS) including electrical specifications (415V/50Hz/3-ph, IP55, IE3). Supplier must complete technical checklist covering metallurgy, surface finish, and quality control procedures.  

Please provide formal quotation CIF Nhava-Sheva in USD with HS codes. Documentation requirements include detailed FAT protocols and packing specifications.

Looking to purchase 1 unit of 12V 1.6KW Hydraulic Brush DC Motor Model ZD1230. Require price in USD including shipping costs to US address 412 E.mountainview ct. Need to confirm exact delivery timeline. Please provide detailed quote with shipping cost breakdown.

Require 12V DC motors with 775 RPM specification. Must have dual ball bearings design. Quantity required is 10,000 units. Please provide price quotation in RMB.

Looking to purchase 1 unit of gear motor reducer with specifications:  
- 110VAC voltage  
- 20W power rating  
- 50/60Hz frequency  
- 1:40 gear ratio  
- Model YN70-2070JB40G10  

Please provide best price with delivery timeline. No rush order required.  
Prefer direct manufacturer quotations.  
No intermediaries please.

Urgently require 3-phase thyristor firing card for industrial motor control application. Specifications needed:
- Operating voltage: 380V
- Frequency: 50Hz
- Power capacity: 300KW DC motor control
Must comply with power plant rectifier system requirements. Please provide technical specifications and lead time details.

Looking for DC motor model 68ZY10002 with specifications: 100VDC operating voltage, 0.58AM current, 31W power output, 1500 R/min rotation speed. Need a small quantity for product testing purposes. Please provide quotation based on these technical parameters.

I'm seeking Brushless DC motors for fitness equipment applications. Required specifications include:
- Power rating: 600W
- Voltage options: 48V and 310V
- High torque performance
- Brushless DC motor type

Please confirm availability and provide technical specifications sheets. Specify if customization options are available for fitness equipment integration.

I need to purchase hydraulic power units with DC motor. Please confirm product availability and provide the operation manual along with technical specifications. Voltage requirements include 12V/24V/48V/96V configurations. Kindly share detailed product information for evaluation.

Require 2 units of 15KW gear motors for escalator drive systems. Specifications must include:
 
Motor Specifications:
- 400/690V 60Hz
- 1200 RPM
- IP65 protection
- F class insulation
- 27.5:1 gear ratio
- 190A starting current
- S6-60 duty cycle

Gear Specifications:
- TKN-160 model
- 20-tooth sprocket
- 95mm drive chain compatibility
- VG460 synthetic oil lubrication
- 13.5L oil capacity

Dual motor configuration required with right/left side sprocket orientation. Must comply with ambient temperature rating up to 40°C.

I need a SMART Controller (FOC) for a front motor.  
Required specifications:  
- Model: SQ-X6G-Q  
- Voltage: 48V DC  
- Current: 19A  
- Undervoltage protection: 39V  
Quantity required: 1 piece.  
Please confirm if you can supply this exact configuration.

I need 12V DC motors with 6 liters per minute discharge capacity for battery-powered sprayer pumps. The motor should be compatible with DC battery systems. Please confirm if your product meets these specifications and can be integrated with sprayer pump mechanisms.

We need detailed specifications and pricing for brushless DC motors with below parameters:
- Voltage: 24V DC
- Power: 700W
- Speed: 1500 RPM
- Torque: 20 N·m
- Service Life: 10,000 hours

Please provide:
1. MOQ (Minimum Order Quantity)
2. Unit price based on different quantities
3. Lead time for sample and bulk orders
4. Certifications (CE/ROHS etc.)
5. Warranty terms

Manufacturers/suppliers with engineering support preferred. Include product datasheet with technical specifications.

We are looking for reliable manufacturers/suppliers of hollow shaft helical worm gear motors with cast iron housing. Please provide detailed specifications including:
1. Power range and speed ratio options
2. Torque capacity and efficiency ratings
3. Material specifications for gears and housing
4. Available certifications (CE, ISO, etc.)
5. MOQ and unit pricing
6. Standard lead time for bulk orders
Suitable for industrial applications requiring high efficiency power transmission. Suppliers must provide quality assurance and OEM service capability.

 
We are seeking quotations for programmable DC motor speed controllers with the following specifications:  
? Model: 1204-4201  
? Voltage: 24-36 VDC  
? Current Rating: 275A  
? Required Quantity: 6 units  

Suppliers are requested to provide:  
1. Detailed product specifications  
2. Unit price and MOQ  
3. Estimated delivery timeline  
4. Certification/compliance documents  

Please indicate compatibility with industrial motor control systems.  

We are looking for servo motor encoders with the following requirements:  
1. Type: Optical rotary encoder compatible with servo motors  
2. Quantity: 1 unit (sample/testing phase)  
3. Voltage: DC 5V operation  
4. Resolution: 2500 PPR  
5. Shaft type: Taper hollow shaft design  

Please provide:  
- Detailed product specifications  
- MOQ for future orders  
- Unit price for sample order  
- Lead time for production  
- Compliance certifications  

Manufacturers/suppliers with OEM experience preferred. Include product datasheet and testing reports.

We are seeking suppliers for industrial stepper motors with the following specifications:
- Model: PHB57S76-610M-SF
- Step angle: 1.8 degree
- Frame size: 57x57mm (NEMA 23 standard)
- Voltage: 24V DC
- Custom specifications available

Required details:
1. Technical specifications sheet
2. MOQ and bulk pricing tiers
3. Lead time for sample/production orders
4. Certification documentation (CE/RoHS)

Please provide your best offer with commercial terms. Potential for ongoing partnership based on initial transaction quality.

I am looking to buy heavy duty dc motores for rolling mill. 22 nos. within 2 weeks.

need dc motor  dm-12sp with 5gu-180k, 4 pc immediately, price is 1000$

Need a replacement for the ZY7712WZ motor reducer, which is the plastic gear inside the gearbox.