We are seeking a 640kVA diesel generator set with the following specifications:

Main parameters:
- Prime power: 570kVA/456kW
- Standby power: 640kVA/512kW
- V-12 turbocharged engine with ≤26.6L displacement
- Fuel consumption: ≤124L/h (100% load), ≤95L/h (75% load), ≤64L/h (50% load)
- System capacities: 59L oil, 120L coolant, 1120L fuel tank

Alternator requirements:
- 400/230V 50Hz 3-phase brushless design
- H-class insulation and IP23 protection
- AVR voltage regulation with ±1% accuracy
- 110% overload capacity for 1 hour

Control panel must include:
- Manual/automatic operation modes
- ATS and automatic load sharing
- Under-frequency protection
- Emergency stop function

Essential configuration:
- Soundproof canopy
- Automatic battery charger
- Fuel tank heater
- Lockable fuel filler cap
- Complete cable set

Please provide technical compliance confirmation with your quotation.

Looking for automatic soft close door systems compatible with Volkswagen Passat models produced between 2011-2021. Required to operate smoothly without manual operation, suitable for B3/B5/B6/B7/B8 platform vehicles. Please provide specifications and certification details.

Urgently require laboratory equipment with specifications:
1. Climatic Chamber - 120L capacity, -20°C to 60°C temperature range, 20%-95% humidity control, 220V
2. Laboratory Oven - 250L capacity, 200°C max temperature, PID control system, stainless steel interior
3. Sieve Shaker - Digital timer up to 99 minutes, compatible with 200-300mm sieves
4. Concrete Sieve Set - 200mm diameter, 10 stainless steel sieves (31.5mm to 0.063mm)
5. Programmable Mortar Mixer - 5L capacity with automatic operation

Immediate delivery or 2-3 weeks timeline required. Provide technical specifications and commercial offer.

Require a custom-built misting system with below specifications:

Dual-Liquid Dosing:
- Two separate 5-20L concentrate tanks
- Automatic proportional mixing (1-2% per liquid)
- Integrated with main water line

Pump Requirements:
- Stainless steel plunger pump
- 50-70 bar pressure capacity
- Flow rates: 1L/min (20 nozzles), 3L/min (60 nozzles), 12-15L/min (300 nozzles)

Nozzle Specifications:
- Stainless steel/brass construction
- 3-10μm droplet size
- Anti-drip function

Control System:
- Digital/PLC controller with dosing ratio adjustment
- Programmable misting intervals and cycles
- Optional remote/app control

Compact design preferred (≤50cm x 60cm). Pre-filtration system required to prevent nozzle blockage.}

Seeking detailed product specifications and technical parameters for automatic sensor-controlled roll paper towel dispensers. Interested in understanding the operational mechanism, power requirements, and compatibility with different paper roll sizes. Please provide material composition details and certifications available for this equipment.

We are seeking a semi-automatic production line for manufacturing Improved Cookstoves (ICS) with weekly capacity of 1,200 units. The system must include:  
- Shell cutting/pressing equipment  
- Welding fixtures and assembly stations  
- Pot holder/grate fabrication units  
- Coating/finishing systems  
- Quality control mechanisms  
 
Required compatibility with Tier 3/4 clean cookstove performance standards. Design parameters include mild steel construction with insulation lining. Prefer semi-automated processes for core manufacturing stages. Please specify equipment configurations and compliance certifications.

We require a smart environmental monitoring device designed as fixed fan-shaped housing (non-functional fan). The unit must include:
1. Solar power system with lithium battery backup
2. IP55-rated protective enclosure
3. NB-IoT/LTE-M connectivity
4. Integrated sensors for PM2.5/PM10 and wind speed detection
5. Insect presence detection capability with automatic municipal notification system
The device should enable municipal pest-control dispatch without citizen complaint submission.

We require 1 unit of HDPE Pipe Extrusion Line with PLC control system.  
Key specifications:  
- Pipe diameter range: 450mm to 800mm  
- Automatic PLC control  
- Complete production line configuration  

Please provide:  
1. Detailed technical parameters  
2. MOQ confirmation for single unit purchase  
3. FOB price and payment terms  
4. Estimated production lead time

We are seeking high-speed automatic cone winders for large-scale viscose thread winding production. Key requirements include:  
- Production capacity: ~2,200 cones/hour (22,000 cones/10-hour shift)  
- Fully automatic operation with tension control  
- Cone transfer system for continuous winding  
- Capability to wind ~3,000 yards per cone  
- Durable construction for continuous operation  

Purchase plan:  
- 80 units of high-end models  

Required information:  
1. FOB price per unit  
2. Total lead time for production and delivery  
3. Warranty terms and after-sales support details  

Please provide specifications matching these requirements.

Require industrial washing equipment for raw sheep wool processing.  
Key specifications:  
- Capacity: 15kg per cycle  
- Temperature control system required  
- Enclosed door design to minimize odor  
- Basic washing functionality (no additional features needed)  

Additional requirements:  
- Delivery required by March  
- Prefer complete system solution  
- MOQ and warranty terms required  

Please provide technical specifications with price quotation.

Seeking full automatic poultry farming equipment for 10000 laying hens. Key requirements:  
1. Equipment Type: New automatic chicken cage systems with egg production capabilities  
2. Capacity: Designed for 10000-layer hen operation  
3. Automation Features: Full automatic feeding, watering, and environmental control  
4. Delivery: Required within 30 days after order confirmation  
5. Origin: Prefer China-manufactured equipment  
6. Additional Services: Require installation support and operator training  
7. Payment: Flexible options including T/T and Western Union  
Please provide detailed specifications, MOQ, pricing tiers, and warranty terms.

Require quotation for semi-automatic mushroom substrate/spawn bagging machine with specifications:  
1. Technical Parameters:  
- Bag size capacity: 3–5 kg (pellet/sawdust/straw mix)  
- Output: 200–250 bags per hour  
- Power configuration: 220V single-phase  

2. Functional Requirements:  
- Must include hopper with auger feeder system  
- Foot pedal control mechanism  
- Optional vibration/tamping platform  
- 12-16 inch impulse sealing component  

3. Commercial Terms:  
- Request separate FOB China port and CIF Chattogram Port/ICD Dhaka quotations  
- Required machine weight and packaging dimensions for logistics calculation  

4. Timeline Clarifications:  
- Production lead time after order confirmation  
- Estimated shipping duration to Bangladesh  

5. After-sales Support:  
- Confirm availability of local agents/technical support in South Asia region  

Please provide detailed specifications sheet and warranty terms.

We are seeking water purification systems to distribute in Costa Rica. Detailed requirements:  

Type II Water System:  
- Pretreatment with 0.5 micron & carbon filters  
- Integrated RO, EDI and UV components  
- Minimum 3L/hour production with 30L storage tank  
- Wall/table mounting capability  
- 115VAC 60Hz compatibility with IEC13 connector  
- Real-time monitoring of conductivity/resistivity & temperature  

Type I Water System:  
- Direct integration with Type II system output  
- 18.2 MΩ·cm resistivity at 25°C  
- ≤5 PPB TOC with mixed resin & UV photo oxidation  
- 0.22 micron final filter and leak detection  
- Flow control: 2L/min with multi-speed dispenser  
- Automatic recirculation & filter replacement alarms  
- Volumetric dispensing (100ml-25L) & pedal option  

Common Requirements:  
- IEC13 power connection with 2.5m cable  
- 100-240VAC 60Hz voltage compatibility  
- Parameter displays for both systems  
- TOC monitoring for Type I  

Please provide technical specifications, MOQ, pricing, and lead time.

We are looking for a flat copper cold rolling mill specifically designed for manufacturing FFC cables used in automotive airbag systems. Please provide detailed specifications including:
1. Roller width and maximum working speed
2. Material thickness range capability
3. Automatic control system features
4. Production capacity per hour
5. Required certifications (ISO/TS16949 etc.)

Kindly include:
- MOQ
- Price range
- Lead time
- Installation support details

Suppliers with experience in airbag component manufacturing equipment preferred.

finger jointer semi automatic rl 590c with 4400mm pressing length. it is not specifically 4400mm, will consider standard length (4600/6300mm). looking for a compact solution as have limited space. do not require long lengths as a timber door manufacture

Inquiry About 1000kg Electric gate motor with remote controller for rolling shuttter doors (DJM-1000-1P)

Received an inquiry from a client for 2 devices of the “In-line Annealing Machine” required for the production line. Technical information: working principle - non - contact induction heating annealing; suitable for square or round conductor; solenoid inner diameters 15mm and 25mm with internal ceramic tubes; maximum annealing temperature 650°C; temperature control modes: automatic with line speed tracking and local manual control; main power supply and operation frequency to be mentioned; cooling water supplied 150 L/min, inlet temperature below 35°C; device should have touchscreen interface; main equipment dimension to be specified; contract and bank guarantee for minimum 12 months required; complete documentation and software backups to be provided; specify the brand and manufacturer of all equipment and send catalogue and technical specification; determine the price of each spare part separately. 

I am interested in procuring automatic car umbrella in a large quantity. Please provide product specifications (size, material grade, material thickness, technical specifications of the automatic device and its remote control range), minimum order quantity (MOQ). Is it possible for the final assembly of this product to be done in India and what are the requirements? I need standard size information and expected order volume depends on the rate. I need 1000 qty for the standard size. The requirement is automatic opening, and the box alignment is horizontal on the car.

Seeking a complete baby food powder filling and packaging line with a production capacity of 300 kg/hour, for packaging in 400g metal cans. Request a detailed quotation with specifications including product (infant cereal powder), packaging format (metal cans), filling system (automatic filler with weighing system), sterilization (UV or dry - air cleaning of cans), sealing (vacuum sealing with nitrogen flushing), control system (Siemens PLC, SCADA, metal detection, optional vision system), additional features (lid press, date coding, weight rejection system, case packer, palletizer), line capacity (300 kg/hour), expected delivery in 90 days, one production line

Inquiry About Multi-level Underground Automatic Car Lift/PLC Control Car Parking System/Car Underground Lift

Inquire whether the company can manufacture a studio panel lighting kit with components including 2 studio panel lights (LED, slim profile, matte finish), 2 barn doors, 2 tilt mounts, 2 70” adjustable light stands, 2 power cords, a remote control and a travel bag. Interested in private labeling and customization options. Ask for information such as manufacturing ability, MOQ, bulk order unit pricing, available customization options, production and shipping lead times, and catalogs or technical specifications.

Inquiry About SKD-14 Automatic Pressure Control

Ask for quotation of video doorbell (1), automatic gate control (1), smart a/c switch (45), 1 - 4 gang smart switches (15, 17, 5, 13), Google voice control (12), indoor and outdoor cameras (5, 4), automatic window controls (4), 21 ceiling Bluetooth speakers (21), access point (5), touchscreen keypad for all smart home control (2), PIR sensors (2), 25mm 4 - way box (3 pkts), 200wat transformer for motion sensor step light (2), motion sensor step light (2), sequence machine for motion (2), sensor step light control (2), sensor step profile lights (20), Rj45 jack (50), zone lighting and control (1), 10" Smart Control Panel (1), 4" Smart Music Amplifier/Keypad (2), music and entertainment 30w premium ceiling speakers (13), outdoor speakers (2), 2in1 Bluetooth speakers (3), access control. Need quotation now and delivery in 3 days.

I am interested in developing a custom lava lamp that can be controlled via an app, allowing users to turn the lamp on and off remotely and set a timer for automatic shut - off. Ask about feasibility, customization options, production timeline, minimum order quantity, pricing, and app integration.